RS PRO 1.75mm Grey PLA Glitter 3D Printer Filament, 500g

The RS PRO 1.75mm diameter 3D printer filament has printing material of polylactic acid (PLA) which is a plastic made from renewable natural resources and one of the most popular materials for 3D printing. Plastics such as PLA are the most popular 3D printing material due to its simplicity, dimensional accuracy and low cost. This metallic PLA is a highly aesthetical PLA based filament with sparkling flakes inside. The filament retains the typical features of PLA but is tougher and less brittle. The sparkling flakes help to conceal layer lines and because of the translucency of PLA combined with the flakes, the colour saturation can be increased by increasing wall thickness. There is no need for a special nozzle as the material is not abrasive. It is recommended to purge the nozzle after printing, to prevent a build-up of flakes for the next print.

• Low warping
• Limited smell
• FDM printing technology
• Tolerance of ±0.05mm
• Roundness of ≥ 95%
• Specific gravity of 1.24g/cc
• Tensile strength at yield of 70Mpa
• Strain at field of 5%
• E-modulus of 3120Mpa
• Easy to print
• Beautiful metallic effect
• Weight: 500g

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007