Dormer

Dormer Pramet

2862 Products showing for Dormer Pramet

Sort By
41 of 144
Stocked by manufacturer
Dormer End Mill, 4 mm Cutter, Carbide, 4mm Shank, 31 mm Cut Length
  • RS Stock No. 729-193
  • Mfr. Part No. S7154.0
Subtotal (1 unit)
$98.22(exc. GST)
$98.22/unit
Stocked by manufacturer
Dormer End Mill, 12 mm Cutter, Carbide, 12mm Shank, 25 mm Cut Length
  • RS Stock No. 729-198
  • Mfr. Part No. S71612.0
Subtotal (1 unit)
$207.73(exc. GST)
$207.73/unit
Stocked by manufacturer
Dormer End Mill, 14 mm Cutter, Carbide, 14mm Shank, 30 mm Cut Length
  • RS Stock No. 729-277
  • Mfr. Part No. S94414.0
Subtotal (1 unit)
$201.46(exc. GST)
$201.46/unit
Stocked by manufacturer
Dormer Threading Tap, UNF 0.25 inch - 28 TPI Thread, UNC Standard, Hand Tap
  • RS Stock No. 625-523
  • Mfr. Part No. E559UNF1/4NO1
Subtotal (1 unit)
$10.42(exc. GST)
$10.42/unit
Stocked by manufacturer
Dormer Threading Tap, UNF 0.25 inch - 28 TPI Thread, UNC Standard, Hand Tap
  • RS Stock No. 625-524
  • Mfr. Part No. E559UNF1/4NO2
Subtotal (1 unit)
$10.42(exc. GST)
$10.42/unit
Stocked by manufacturer
Dormer Threading Tap, UNF 0.25 inch - 28 TPI Thread, UNC Standard, Hand Tap
  • RS Stock No. 625-525
  • Mfr. Part No. E559UNF1/4NO3
Subtotal (1 unit)
$10.42(exc. GST)
$10.42/unit
Stocked by manufacturer
Dormer Threading Tap, M1.7 Thread, Metric Standard, Machine Tap
  • RS Stock No. 299-9621
  • Mfr. Part No. E500M1.7NO3
Subtotal (1 unit)
$87.84(exc. GST)
$87.84/unit
Temporarily out of stock
Dormer Threading Tap, M6 Thread, Metric Coarse Standard, Hand Tap
  • RS Stock No. 274-477
  • Mfr. Part No. E557M6
Subtotal (1 unit)
$21.75(exc. GST)
$21.75/unit
Stocked by manufacturer
Dormer Threading Tap, M12 Thread, Metric Coarse Standard, Hand Tap
  • RS Stock No. 274-461
  • Mfr. Part No. E556M12
Subtotal (1 unit)
$36.96(exc. GST)
$36.96/unit
Stocked by manufacturer
Dormer Threading Tap, 3/8 in UNC Thread, UNC Standard, Hand Tap
  • RS Stock No. 272-9229
  • Mfr. Part No. E5153/8NO3
Subtotal (1 unit)
$40.63(exc. GST)
$40.63/unit
Stocked by manufacturer
Dormer High Speed Steel-E Drill Bit, 20.5 mm Head, 3 Flute(s), 90 °, 1 Piece(s)
  • RS Stock No. 812-6034
  • Mfr. Part No. G57020.5
Subtotal (1 unit)
$273.69(exc. GST)
$273.69/unit
Stocked by manufacturer
Dormer End Mill, 14 mm Cutter, Carbide, 14mm Shank, 26 mm Cut Length
  • RS Stock No. 729-168
  • Mfr. Part No. S722HB14.0
Subtotal (1 unit)
$332.83(exc. GST)
$332.83/unit
Temporarily out of stock
Dormer P823 Series Cone Deburring Tool, 3 mm Carbide
  • RS Stock No. 272-9578
  • Mfr. Part No. P8233.0X3.0
Subtotal (1 unit)
$23.79(exc. GST)
$23.79/unit
Stocked by manufacturer
Dormer End Mill, 8 mm Cutter, Carbide, 8mm Shank, 19 mm Cut Length
  • RS Stock No. 729-024
  • Mfr. Part No. S814HB8.0
Subtotal (1 unit)
$120.01(exc. GST)
$120.01/unit
Stocked by manufacturer
Dormer End Mill, 14 mm Cutter, Carbide, 14mm Shank, 32 mm Cut Length
  • RS Stock No. 728-812
  • Mfr. Part No. S76114.0
Subtotal (1 unit)
$287.78(exc. GST)
$287.78/unit
Stocked by manufacturer
Dormer End Mill, 5 mm Cutter, Carbide, 5mm Shank, 15 mm Cut Length
  • RS Stock No. 729-136
  • Mfr. Part No. S7635.0XR0.5
Subtotal (1 unit)
$105.98(exc. GST)
$105.98/unit
Stocked by manufacturer
Dormer Threading Tap, M8 Thread, Metric Fine Standard, Hand Tap
  • RS Stock No. 273-0231
  • Mfr. Part No. E513M8X1.0NO7
Subtotal (1 unit)
$83.29(exc. GST)
$83.29/unit
Stocked by manufacturer
Dormer End Mill, 10 mm Cutter, Carbide, 10mm Shank, 22 mm Cut Length
  • RS Stock No. 729-089
  • Mfr. Part No. S76310.0XR2.0
Subtotal (1 unit)
$196.50(exc. GST)
$196.50/unit
Stocked by manufacturer
Dormer End Mill, 10 mm Cutter, Carbide, 10mm Shank, 22 mm Cut Length
  • RS Stock No. 729-088
  • Mfr. Part No. S76310.0XR1.0
Subtotal (1 unit)
$196.50(exc. GST)
$196.50/unit
Stocked by manufacturer
Dormer End Mill, 12 mm Cutter, Carbide, 12mm Shank, 25 mm Cut Length
  • RS Stock No. 729-179
  • Mfr. Part No. S71012.0
Subtotal (1 unit)
$185.18(exc. GST)
$185.18/unit
1
41
144
Results per page