Parker Double Tube Clamp RBP1-110

  • RS Stock No. 309-8347
  • Mfr. Part No. RBP1-110
  • Manufacturer Parker
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Tube Clamp Double

Series B Tubeclamps by Parker designed to enable fixing of straight and bent, tubes and hoses. The clamp body is a square/open design with a ribbed bore enabling secure fixing while ensuring a high degree of sound deadening and vibration damping. Ideal for normal mechanical stress, they are available as a twin tube clamp in five standard sizes for nominal mechanical requirements.

Features and Benefits

• Reset capability
• High-tensile strength
• High abrasion resistance
• Resistant to cold
• DIN 3015
• Operating temperature range -30°C to 90°C
• Polypropylene clamp body with steel weld plate, zinc plated steel top plate and M6 x 30 mm zinc plated steel clamp screws

//media.rs-online.com/t_line/L727581-01.gif
Specifications
Attribute Value
Number of Tubes Held Double
For Tube Outside Diameter 10mm
Clamp Spacing 0.9m
Body Material PP
Maximum Operating Temperature +90°C
Maximum Tube Outer Diameter 10mm
Minimum Operating Temperature -30°C
On back order for despatch 02/06/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each (In a Pack of 5)
$ 7.732
(exc. GST)
$ 8.505
(inc. GST)
units
Per unit
Per Pack*
5 - 25
$7.732
$38.66
30 - 120
$7.604
$38.02
125 +
$7.48
$37.40
*price indicative
Related Products
Flaring Pin Manual flaring tools are used to ...
Description:
Flaring Pin Manual flaring tools are used to produce the required 37° flare at the hydraulic tube end to ensure an effective single seal point between the nose of the Triple-Lok flared tube fitting and the tube These tools are ...
Vice Block Manual flaring tools are used to ...
Description:
Vice Block Manual flaring tools are used to produce the required 37° flare at the hydraulic tube end to ensure an effective single seal point between the nose of the Triple-Lok flared tube fitting and the tube These tools are ...
Tube Clamp Single Series A Tubeclamps by Parker ...
Description:
Tube Clamp Single Series A Tubeclamps by Parker designed to enable fixing of straight and bent, tubes and hoses The clamp body is in two equal halves with a ribbed bore enabling secure fixing while ensuring a high degree of ...
RS Pro Tube Clamps - Double RS Pro ...
Description:
RS Pro Tube Clamps - Double RS Pro Tube Clamps, designed to enable fixing of straight and bent, tubes and hoses The clamp body is a square/open design with a ribbed bore enabling secure fixing while ensuring a high degree ...