7 Way Preci-Dip Right Angle Through Hole 2 mm Pitch SIL Socket, Solder, 3A
- RS Stock No.:
- 701-9496P
- Mfr. Part No.:
- 831-87-007-20-001101
- Brand:
- Preci-Dip
This image is representative of the product range
Currently unavailable
Sorry, we don't know when this will be back in stock.
Alternative
This product is not currently available. Here is our alternative recommendation.
Each (In a Pack of 5)
$16.97
(exc. GST)
$18.67
(inc. GST)
- RS Stock No.:
- 701-9496P
- Mfr. Part No.:
- 831-87-007-20-001101
- Brand:
- Preci-Dip
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Preci-Dip | |
| Product Type | SIL Socket | |
| Number of Contacts | 7 | |
| Contact Material | Beryllium Copper Alloy, Brass | |
| Current | 3A | |
| Contact Plating | Gold, Tin | |
| Orientation | Right Angle | |
| Pitch | 2mm | |
| Mount Type | Through Hole | |
| Housing Material | Fibreglass Reinforced Liquid Crystal Polymer | |
| Minimum Operating Temperature | -55°C | |
| Termination Type | Solder | |
| Maximum Operating Temperature | 125°C | |
| Length | 14mm | |
| Width | 2.8mm | |
| Depth | 2.2mm | |
| Select all | ||
|---|---|---|
Brand Preci-Dip | ||
Product Type SIL Socket | ||
Number of Contacts 7 | ||
Contact Material Beryllium Copper Alloy, Brass | ||
Current 3A | ||
Contact Plating Gold, Tin | ||
Orientation Right Angle | ||
Pitch 2mm | ||
Mount Type Through Hole | ||
Housing Material Fibreglass Reinforced Liquid Crystal Polymer | ||
Minimum Operating Temperature -55°C | ||
Termination Type Solder | ||
Maximum Operating Temperature 125°C | ||
Length 14mm | ||
Width 2.8mm | ||
Depth 2.2mm | ||
- COO (Country of Origin):
- CH
2 mm IC Sockets
These Swiss Preci-dip IC "Hard metric" PCB Socket Connector headers are solder tail Through Hole or SMD perpendicular Gull-Wing mount.
Sockets have Tin plated Brass sleeves with Flash Gold plated Beryllium Copper (4 finger) contact clips
The Through Hole headers have a Pin length of 3.2 mm
Suitable for Mating Pin Ø 0.4 → 0.66 mm or 0.5 mm square
Standards
UL 94V-0