Intelligent LED Solutions ILE-BI01-GGRIRICBD-SC201., BIOFY Sensor Version 1.0 PPG Signal PPG Signal Sensor for SFH 7072

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

At the heart of each Biofy® Eco1 is a Biofy® SFH7072 sensor. Apart from two green emitters and one photodiode with an infrared filter, it also contains one red and one infrared emitter as well as a broadband photodiode. The distance between the three latter components was increased so that more light is reflected onto the detector. The
improved signal quality of the measurements with infrared and red light simplifies the calculation of the oxygen saturation of blood (SpO2). Eco1s are compact, powerful LED light sources built on FR4 PCB with thermal vias for optimal thermal management. Biofy® Eco1s generate very little heat and therefore do not require any secondary Heat Sinking.

Biofy® Eco1s contain a Biofy® SFH7072 Sensor*
Mounting holes using M3 screws allows easy installation
Size (LxWxH): 20.25x13.70x0.90mm
SFH7072 contains:
1 x Infrared Emitter 950nm
1 x Red LED 660nm
2 x Green LED 530nm
1 x IR Cut Detector with a spectral range sensitivity of 402...694nm
1 x Broadband Detector spectral range sensitivity of 420…1100mm

Specifications
Attribute Value
Featured Device SFH 7072
For Use With Fitness Trackers, Mobile Devices, Smart Watches, Wearable Devices
Kit Name BIOFY Sensor Version 1.0
13 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 19.01
(exc. GST)
$ 20.91
(inc. GST)
units
Per unit
1 - 4
$19.01
5 - 9
$17.44
10 - 24
$16.09
25 +
$14.94
Related Products
VCNL4040 integrates a proximity sensor (PS), ambient light ...
Description:
VCNL4040 integrates a proximity sensor (PS), ambient light sensor (ALS), and a high power IRED into one small package. It incorporates photodiodes, amplifiers, and analog to digital converting circuits into a single chip by CMOS process. The 16-bit high resolution ...
xChips are a rapid electronics development ecosystem to ...
Description:
xChips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on coding.xChips ...
Panel-mounting Grove interfaceDigital output: 0 or VCCBuilt-in indicator ...
Description:
Panel-mounting Grove interfaceDigital output: 0 or VCCBuilt-in indicator LEDThreshold adjustable via potentiometerPower supply: 3.5 – 5.5V DCReflective Photosensor: RPR-220Effective working distance: 4-15mmMinimum detectable width for monochrome lines: 10mmConnector: 4 pin Buckled Grove interfaceDimension: 20mm*20mm.
The 4-Directional Tilt Sensor is a perfect accelerometer ...
Description:
The 4-Directional Tilt Sensor is a perfect accelerometer replacement in those applications which may not need precise angular feedback.This type of sensor is commonly used in many smart phones and digital cameras as a cheaper means to adjust the screen ...