Schneider Electric Preventa XPS AC Emergency Stop Safety Relay, 24V ac/dc, 3 Safety Contacts

Simple and effective safety monitoring has never been more crucial in today's highly automated world. Prevention is key to site safety, that's why Schneider Electric offers a Safety Relay in the form of the 'Preventa XPSAC' module that is second to none. Being able to monitor faults with devices along a circuit has the power to stop emergency situations from even occurring.

• Single channel safety relay output provided with 3 N/O safety relay outputs plus1 solid-state output PLC signalling.

• Monitoring of single safety functions, providing an automated solution for use with applications such as emergency push stop buttons or switches.

• 24 V DC option incorporated for each supply voltage versions.

• Slin in design, meaning it can fit nicely even in space constraint spaces.

• 22.5 mm symmetrical DIN rail support, offering flexible and versatile safety system installation.

• Local signalling in the form of LEDs to help aid in diagnostics (these provide information on the circuit status).

Protection ratings & Safety features (see datasheet for specifics) -

• Input protection type is internal, electronic.

• EN1088/ISO 14119, EN 60204-1, EN/IEC 60947-5-1, EN/ISO 13850

• CSA, TUV & UL listed

• IP 40 (enclosure) for protection against small objects up to 1mm such as tools, wires and small wires.

• IP 20 (terminals) for protection against solid objects such as fingers, smaller tools up to 12mm.

All dangerous machinery requires an automated solution to prevent harm to immediate users and also prevent damage to the machinery. Below are some of the safety applications

• Time delay input if needed allowing you to set up your own time function.

• Two-hand control safety circuits

• Sensing mats and edges

• Safety Curtains

IEC 204-1; EN 292; EN 418; EN 60204-1; EN 1088

BG, UL, CSA

Keep close watch over critical systems with this safety relay from Schneider Electric. Thanks to its three NO contacts, it lets you shut down up to three connected devices in the event of a hazard. A maximum response time of 100ms means it cuts power in a flash when it detects a problem in your circuit. Two LEDs let you know its operating status at a glance to make monitoring a piece of cake. A supply voltage of 24V AC/DC means this is a good choice for low-power systems.

• Clips onto a DIN rail for speedy installation
• Captive screw clamp terminals give you a secure electrical connection
• Red colour means it stands out as an emergency device for ease of identification
• Mean time to failure of 210.4 years for long-lasting use

• Assembly lines
• Packaging equipment
• Industrial motors
• Processing machines

This relay has a low current consumption of 40mA at 24V DC and 90mA at 24V AC, so you can count on it for energy-efficient operation.