Phoenix Contact PSR-TRISAFE PSR-SCP- 24DC/TS/S Series Safety Controller, 20 Safety Inputs, 6 Safety Outputs, 24 V dc

The PSR-TRISAFE-S is a standalone safety controller with 20 safe inputs, four safe outputs and two safe ground-switching outputs. If additional safe outputs or safe relay outputs are needed, standard safety relay expansion modules can be hard-wired to the safe outputs of the PSR-TRISAFE-S module. System designers should consider adding a safety expansion relay for one of two reasons: (a) the PSR-TRISAFE-S module does not have enough safe outputs; (b) a safe relay circuit is needed to switch a voltage other than 24 Vdc. The PSR-TRISAFE-S module is a 24 V solid-state device.

Intuitive three step software
Manipulation proof: Password protect against unathorised changes in the safety logic of the hardware and software: Protect against unwanted changes in the safety logic with the front of device "CONFIRM" button
All commonly used safety functions can be implemented easily and flexibly: E-stop and guard door monitoring, non-contact switches, safety sensors, laser scanners, optical devices (with or without muting) as well as safe mode selection, enabling switches, two hand control devices
2 clock outputs, 4 alarm outputs and ground switching output to increase safety of monitoring circuit

EN954-1 to Category 4, ISO 13849-1 to PLe, IEC 62061 to SILCL 3 for machine and system engineering
SIL3 to IEC 61508 for the Process Industry

TUV FS, UL, cUL

This safety module is a reliable device designed for industrial safety systems, featuring 20 safety inputs and 6 safety outputs in a compact design, measuring 114.5mm x 67.5mm x 99mm. It is tailored for the monitoring of emergency stops, safety doors, and light grids, ensuring compliance with Safety Category 4 and SIL 3 standards.

• Freely configurable for diverse safety functions
• Up to SIL 3 and Safety Category 4 compliant
• Quick start-up enabled through simulation and testing
• User-friendly graphical configuration with SAFECONF software
• Diagnostic capabilities via bus gateways
• Incorporates an LED display for clear status indication

• Used for monitoring emergency stop circuits
• Ideal for integration with safety doors and light grids
• Applicable to two-hand control systems
• Designed for use in industrial automation environments

The module offers 6 outputs, including 4 safe semiconductor outputs rated up to Cat. 4 and 2 ground switching outputs. Each safe output can handle up to 2A, ensuring reliability in various applications.

It operates at a maximum response time of 30 ms and features a protective circuit within voltage limits, providing short-circuit protection and ensuring safe conditions in critical operations.

Yes, it features easy graphical configuration through SAFECONF software, allowing users to set up the module without the need for complex programming, streamlining the setup process.

This device operates effectively in temperatures ranging from -20 °C to 55 °C and can be stored in temperatures from -20 °C to 70 °C, making it suitable for various industrial environments.

It is designed for straightforward DIN rail mounting, accommodating horisontal placement for efficient installation in control panels or enclosures.