ABB 2TLA020070R2000 Identifier, For Use With Pluto Safety Controller

  • RS Stock No. 733-4824
  • Mfr. Part No. 2TLA020070R2000
  • Manufacturer ABB
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Pluto Safety PLC, Base Unit

Pluto from ABB is an "All-Master" safety PLC concept, which simplifies the design of safety systems and achieves the highest safety category 4 according to EN 954-1. All Pluto's are Master units and can see the other Pluto's inputs, outputs and global memories. This enables the Pluto to evaluate the information from the other Pluto's and then take decisions concerning its own safety devices. The Gateway units are available for several different bus systems, i.e. Profibus (733-4836), CanOpen (733-4830), Devicenet (733-4849) and Ethernet (733-4842). Of Pluto's inputs (the smallest unit has 16 I/O), thus can be configured as either inputs or outputs. In the Pluto family by ABB most modules have dual safety outputs - potential free or PNP types. In a two-wire bus system up to 32 Pluto units can be safely connected and communicate with a superior system via a Gateway or HMI displays. Therefore within a maximum extended system 1472 I/O's can be connected. Also all input components may be connected in series for even more complexity and optimisation.

Simple and easy programming facilities
Easy to configure and install
Up to 640 I/O's
Multiple Plutos can be connected on a bus (via using the IDFIX identifier) and then further interfaced with external networks by using a Gateway, typical example RS stock number (733-4842)
High safety level
Free software available
Programming over the bus
35 mm DIN rail mounting
The IDFIX (733-4824) is an identification circuit which allows multiple Plutos to be identified when connected on a bus system. This module is available to distribute a PLC program within a network of Pluto devices.
Tina adapters such as (733-2477) can be used to connect external safety monitoring equipment

Note

The IDFIX device (733-4824) is connected between the input terminals ID and 0V (also note that the IDFIX device is not required when using a single Pluto, however the absense of an IDFIX requires to be stated when programming the Pluto device.)

Approvals

TUV, FS, CSA

Specifications
Attribute Value
Accessory Type Identifier
For Use With Pluto Safety Controller
2 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 26.99
(exc. GST)
$ 29.69
(inc. GST)
units
Per unit
1 +
$26.99
Related Products
Stackable design allows side by side mounting in ...
Description:
Stackable design allows side by side mounting in a compact formSmall door swing radius allows use down to 160mmIP67 protection, suitable for wet applicationsOperating temperature -25 °C → +85 °CDimensions: H70mm x W34mm x D16mm.
Configurable device capable of centralised monitoring of multiple ...
Description:
Configurable device capable of centralised monitoring of multiple safety functions such as E-stops, safety interlocks, magnetic safety interlocks, two hand controllers, light curtains, zero speed detection, enabling switches. Designed to provide a solution for safety applications requiring conformity to category ...
Eva actuator with unique code for use with ...
Description:
Eva actuator with unique code for use with Adam DYN/OSSD sensors in the Eden sensor system, yellow, 4pcs of DA 2B spacer rings are included.
Magnet switches designed for mounting on movable protective ...
Description:
Magnet switches designed for mounting on movable protective guards such as covers, flaps and doors.Suitable for areas where cleaning, disinfecting or contamination is involvedIP67 ratedFor a suitable safety relay, use 528-0908Effective operating distance 5-15mmFor a suitable coded magnet use stock ...