Infineon Power Switch IC 24-Pin, PG-TSDSO-24
- RS Stock No.:
- 244-2896P
- Mfr. Part No.:
- TLE75602ESHXUMA1
- Brand:
- Infineon
This image is representative of the product range
Bulk discount available
View bulk pricing optionsSubtotal 10 units (supplied on a continuous strip)*
$46.30
(exc. GST)
$50.90
(inc. GST)
FREE delivery for orders over $80.00 ex GST
In Stock
- 5,973 unit(s) ready to ship from another location
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 10 - 99 | $4.63 |
| 100 - 249 | $4.52 |
| 250 - 499 | $4.42 |
| 500 + | $4.31 |
*price indicative
- RS Stock No.:
- 244-2896P
- Mfr. Part No.:
- TLE75602ESHXUMA1
- Brand:
- Infineon
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Infineon | |
| Product Type | Power Switch IC | |
| Switch On Resistance RdsOn | 2.2Ω | |
| Interface Type | Serial | |
| Mount Type | Surface | |
| Package Type | PG-TSDSO-24 | |
| Minimum Supply Voltage | 3V | |
| Maximum Supply Voltage | 28V | |
| Pin Count | 24 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Height | 1.15mm | |
| Standards/Approvals | RoHS | |
| Length | 8.65mm | |
| Automotive Standard | AEC-Q100, AEC-Q11, AEC-Q2 | |
| Series | TLE75602-ESH | |
| Select all | ||
|---|---|---|
Brand Infineon | ||
Product Type Power Switch IC | ||
Switch On Resistance RdsOn 2.2Ω | ||
Interface Type Serial | ||
Mount Type Surface | ||
Package Type PG-TSDSO-24 | ||
Minimum Supply Voltage 3V | ||
Maximum Supply Voltage 28V | ||
Pin Count 24 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Height 1.15mm | ||
Standards/Approvals RoHS | ||
Length 8.65mm | ||
Automotive Standard AEC-Q100, AEC-Q11, AEC-Q2 | ||
Series TLE75602-ESH | ||
The Infineon TLE75602ESHXUMA1 is specially designed to control relays and LEDs in automotive and industrial applications. A serial peripheral Interface (SPI) is utilized for control and diagnosis of the loads as well as of the device. For direct control and PWM there are two input pins available connected to two outputs by default. Additional or different outputs can be controlled by the same input pins (programmable via SPI).
16-bit serial peripheral Interface for control and diagnosis
Daisy Chain capability SPI also compatible with 8-bit SPI devices
2 CMOS compatible parallel input pins with Input Mapping functionality
Cranking capability down to VS = 3.0 V (supports LV124)
Digital supply voltage range compatible with 3.3 V and 5 V microcontrollers
Bulb Inrush Mode (BIM) to drive 2 W lamps and electronic loads
Two internal PWM Generators for μC offload
Very low quiescent current (with usage of IDLE pin)