STMicroelectronics High Side 2, High Side Power Switch IC 32-Pin, QFN 6 x 6
- RS Stock No.:
- 124-561P
- Mfr. Part No.:
- VNF9Q20FTR
- Brand:
- STMicroelectronics
This image is representative of the product range
Bulk discount available
Subtotal 10 units (supplied on a continuous strip)*
$59.10
(exc. GST)
$65.00
(inc. GST)
FREE delivery for orders over $60.00 ex GST
Temporarily out of stock
- 3,000 unit(s) shipping from 13 April 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 10 - 99 | $5.91 |
| 100 + | $5.45 |
*price indicative
- RS Stock No.:
- 124-561P
- Mfr. Part No.:
- VNF9Q20FTR
- Brand:
- STMicroelectronics
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | STMicroelectronics | |
| Power Switch Type | High Side | |
| Product Type | Power Switch IC | |
| Power Switch Topology | High Side | |
| Switch On Resistance RdsOn | 21.5mΩ | |
| Number of Outputs | 4 | |
| Number of Inputs | 2 | |
| Interface Type | SPI | |
| Mount Type | Surface | |
| Package Type | QFN 6 x 6 | |
| Maximum Supply Voltage | 28V | |
| Pin Count | 32 | |
| Operating Current | 34.5A | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Width | 6 mm | |
| Standards/Approvals | European directive 2002/95/EC | |
| Length | 6mm | |
| Automotive Standard | AEC-Q100 | |
| Series | VIPower | |
| Select all | ||
|---|---|---|
Brand STMicroelectronics | ||
Power Switch Type High Side | ||
Product Type Power Switch IC | ||
Power Switch Topology High Side | ||
Switch On Resistance RdsOn 21.5mΩ | ||
Number of Outputs 4 | ||
Number of Inputs 2 | ||
Interface Type SPI | ||
Mount Type Surface | ||
Package Type QFN 6 x 6 | ||
Maximum Supply Voltage 28V | ||
Pin Count 32 | ||
Operating Current 34.5A | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Width 6 mm | ||
Standards/Approvals European directive 2002/95/EC | ||
Length 6mm | ||
Automotive Standard AEC-Q100 | ||
Series VIPower | ||
The ST Microelectronics device made using STMicroelectronics VIPower technology. It is intended for driving resistive or inductive loads directly connected to the ground. The device is protected against voltage transients on the VCC pin. Programming, control, and diagnostics are implemented via the SPI bus. A digital current sense feedback for each channel is provided through an integrated 10-bit ADC. Dedicated trimming bits allow adjusting the ADC reference current.
AEC-Q100 qualified
Programmable Bulb/LED mode for all channels
Advanced limp-home functions for robust fail-safe system
Very low standby current
Optimized electromagnetic emissions
Very low electromagnetic susceptibility
Control through direct inputs and/or SPI
Full configurable wire harness protection (STi²Fuse)
Load current limitation
Self-limiting of fast thermal transients