Infineon REF_ICC80QSG_84W1_BPA Flyback Controller for REF_ICC80QSG_84W1_BPA for 700 V CoolMOS P7, Quasi Resonant
- RS Stock No.:
- 262-5889
- Mfr. Part No.:
- REFICC80QSG84W1BPATOBO1
- Brand:
- Infineon
5 In Global stock for delivery within 10 working day(s)
Added
Price (ex. GST) Each
$143.40
(exc. GST)
$157.74
(inc. GST)
Units | Per unit |
1 + | $143.40 |
- RS Stock No.:
- 262-5889
- Mfr. Part No.:
- REFICC80QSG84W1BPATOBO1
- Brand:
- Infineon
Technical data sheets
Legislation and Compliance
Product Details
84 W AC-DC reference design for battery charger
The REF_ICC80QSG_84W1_BPA is a flyback-based reference design, scalable from 65 W to >100 W and aimed for 12 V/18 V Li-Ion battery packs. It is based on the quasi-resonant flyback controller ICC80QSG and the renowned 700 V CoolMOS™ P7 technology in the small footprint and wave solderable SOT-223 package. The controller burst mode enables low standby <200 mW. The reference board includes a secondary-side auxiliary supply for battery switch and supply of a MCU. Measured efficiency is >90 percent at 230 VAC input voltage, providing excellent performance versus BOM cost ratio for chargers for consumer appliances.
Summary of Features
Secondary-side regulated (SSR) constant current (CC) output
High efficiency and low EMI with quasi-resonant (QR) mode, switching in valley n (QRMn)
Efficiency > 90%, at 230 VAC input and full-load condition
Low standby power with reduced gate driver voltage in burst mode
Standby power <200 mW, at 230 VAC input and no-load condition
Configurable hysteresis of brown-in and brown-out
Adaptive brown-out level triggering based on output power protecting primary components from overheating and saturation
Internal overtemperature protection (OTP), output overvoltage protection (OVP), VCC OVP, MOSFET overcurrent protection (OCP), brown-in and brown-out protection, input OVP and open loop protection
High efficiency and low EMI with quasi-resonant (QR) mode, switching in valley n (QRMn)
Efficiency > 90%, at 230 VAC input and full-load condition
Low standby power with reduced gate driver voltage in burst mode
Standby power <200 mW, at 230 VAC input and no-load condition
Configurable hysteresis of brown-in and brown-out
Adaptive brown-out level triggering based on output power protecting primary components from overheating and saturation
Internal overtemperature protection (OTP), output overvoltage protection (OVP), VCC OVP, MOSFET overcurrent protection (OCP), brown-in and brown-out protection, input OVP and open loop protection
Benefits
84 W scalable AC-DC stage design from 65 W to 130 W
Optimum efficiency and low EMI at low BOM
Easy, safe and robust AC-DC solution for a lot of battery-powered applications
Optimum efficiency and low EMI at low BOM
Easy, safe and robust AC-DC solution for a lot of battery-powered applications
Potential Applications
Battery charging up to 130 W
Power tools
E-bikes
PC
TV
Audio amplifier applications up to 130 W
Power tools
E-bikes
PC
TV
Audio amplifier applications up to 130 W
List of Components
ICC80QSG
IPN70R450P7S (700V CoolMOS™ P7)
IPN70R450P7S (700V CoolMOS™ P7)
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Specifications
Attribute | Value |
---|---|
Power Management Function | Flyback Controller |
For Use With | 700 V CoolMOS P7, Quasi Resonant Flyback Controller ICC80QSG |
Kit Classification | Evaluation Board |
Featured Device | REF_ICC80QSG_84W1_BPA |
Kit Name | REF_ICC80QSG_84W1_BPA |