MikroElektronika MIKROE-1926 Stepper 2 Click Stepper Development Board for A4988 for mikroBUS

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Stepper 2 click mikroBUS™

The Stepper 2 click is an add-on board that driver bipolar stepper motors in micro-stepping modes. The Allegro MicroSystems A4988, DMOS Micro-stepping Driver with Translator and Overcurrent Protection operates directly the 2-phase step motor windings. With the translator, it is easy to drive a micro-step on the motor by simply inputting one pulse on the STEP input.

External motor power supply 7 to 35 V dc capable of 2AStep motors in full, half, quarter, eighth and sixteenth-step modesThree on-board jumpers (J1-J3) select the different stepping modes3.3 V or 5 V power supply on mikroBUS socketThermal shutdown protectionShort circuit protectionDimensions 42.9 x 25.4 mm

Note

Click board comes with the header strips soldered.

Click mikroBUS™ Motor Driver Boards

Specifications
Attribute Value
Kit Classification Development Board
For Use With MikroBUS
Featured Device A4988
Kit Name Stepper 2 click
67 In stock for delivery within 7 working day(s) (Global Stock)
Price (ex. GST) Each
$ 29.05
(exc. GST)
$ 31.95
(inc. GST)
units
Per unit
1 +
$29.05
Related Products
Fan click carries an EMC2301 controller for powering ...
Description:
Fan click carries an EMC2301 controller for powering and regulating the operation of 5V four-wire fans, which are commonly utilized as coolers in computers and other electronics The controller supports PWM speeds from 9.5Hz to 29 KHz, in four programmable ...
MIC24045 click carries MIC24045 I2C-programmable, high-efficiency, wide input ...
Description:
MIC24045 click carries MIC24045 I2C-programmable, high-efficiency, wide input range, 5A synchronous step-down regulator from Microchip The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over I2C interface with additional functionality ...
Evaluation board for supporting customers during their first ...
Description:
Evaluation board for supporting customers during their first steps of designing applications with CIPOS™ Mini PFC integrated IPM The combination of this power board and matching iMOTION™ control board EVAL-M3-102T, based on the IMC102T-F064 iMOTION™ controller, creates a powerful inverter ...
The Grove - 2-Channel SPDT Relay has two ...
Description:
The Grove - 2-Channel SPDT Relay has two single pole - double throw (SPDT) switches It only requires low-voltage and low current signals to control those switches. Specifically, you can use 5V DC to control max.250V AC or 110V DC. ...