onsemi, Power Factor Pre-Regulator Circuit IC 20 kHz 27-Pin, SPMIC 253 Vrms
- RS Stock No.:
- 181-1880
- Mfr. Part No.:
- FPAB20BH60B
- Brand:
- onsemi
This image is representative of the product range
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 181-1880
- Mfr. Part No.:
- FPAB20BH60B
- Brand:
- onsemi
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | onsemi | |
| Product Type | Power Factor Pre-Regulator Circuit IC | |
| Sub Type | Boost PFC | |
| Switching Frequency | 20kHz | |
| Maximum Sink Current | 5mA | |
| Supply Current | 26mA | |
| Zero Power Detection | No | |
| Mount Type | Through Hole | |
| Package Type | SPMIC | |
| Minimum Supply Voltage | 187Vrms | |
| Pin Count | 27 | |
| Maximum Supply Voltage | 253Vrms | |
| Minimum Operating Temperature | -40°C | |
| Standards/Approvals | UL No. E209204 (UL1557) | |
| Series | SPM 3 | |
| Width | 27 mm | |
| Height | 5.7mm | |
| Length | 44.2mm | |
| Maximum Operating Temperature | 150°C | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand onsemi | ||
Product Type Power Factor Pre-Regulator Circuit IC | ||
Sub Type Boost PFC | ||
Switching Frequency 20kHz | ||
Maximum Sink Current 5mA | ||
Supply Current 26mA | ||
Zero Power Detection No | ||
Mount Type Through Hole | ||
Package Type SPMIC | ||
Minimum Supply Voltage 187Vrms | ||
Pin Count 27 | ||
Maximum Supply Voltage 253Vrms | ||
Minimum Operating Temperature -40°C | ||
Standards/Approvals UL No. E209204 (UL1557) | ||
Series SPM 3 | ||
Width 27 mm | ||
Height 5.7mm | ||
Length 44.2mm | ||
Maximum Operating Temperature 150°C | ||
Automotive Standard No | ||
- COO (Country of Origin):
- CN
The FPAB20BH60B is an advanced PFC SPM® 3 module providing a fully-featured, high-performance Boost PFC (Power Factor Correction) input power stage for consumer, medical, and industrial applications. These modules integrate optimized gate drive of the built-in IGBT to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockout, over-current shutdown, thermal monitoring, and fault reporting. These modules also feature a full-wave rectifier, and high-performance output diode for additional space savings and mounting convenience.
600 V - 20 A Single-Phase Boost PFC with Integral Gate Driver and Protection
Very Low Thermal Resistance Using Al2O3 DBC Substrate
Full-Wave Bridge Rectifier and High-Performance Output Diode
Built-in NTC Thermistor for Temperature Monitoring
Optimized for 20kHz Switching Frequency
Isolation Rating: 2500 Vrms/min.
Motion Control - Home Appliance/Industrial Motor