onsemi, Power Factor Pre-Regulator Circuit IC 20 kHz 27-Pin, SPMHC 264 Vrms
- RS Stock No.:
- 181-1879
- Mfr. Part No.:
- FPDB60PH60B
- Brand:
- onsemi
This image is representative of the product range
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 181-1879
- Mfr. Part No.:
- FPDB60PH60B
- Brand:
- onsemi
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | onsemi | |
| Product Type | Power Factor Pre-Regulator Circuit IC | |
| Sub Type | Power Factor Pre-Regulator Circuit | |
| Maximum Sink Current | 5mA | |
| Switching Frequency | 20kHz | |
| Supply Current | 26mA | |
| Zero Power Detection | No | |
| Mount Type | Through Hole | |
| Package Type | SPMHC | |
| Pin Count | 27 | |
| Minimum Supply Voltage | 180Vrms | |
| Maximum Supply Voltage | 264Vrms | |
| Minimum Operating Temperature | -40°C | |
| Series | FPDB60PH | |
| Height | 5.7mm | |
| Length | 44.2mm | |
| Standards/Approvals | No | |
| Width | 27 mm | |
| Maximum Operating Temperature | 150°C | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand onsemi | ||
Product Type Power Factor Pre-Regulator Circuit IC | ||
Sub Type Power Factor Pre-Regulator Circuit | ||
Maximum Sink Current 5mA | ||
Switching Frequency 20kHz | ||
Supply Current 26mA | ||
Zero Power Detection No | ||
Mount Type Through Hole | ||
Package Type SPMHC | ||
Pin Count 27 | ||
Minimum Supply Voltage 180Vrms | ||
Maximum Supply Voltage 264Vrms | ||
Minimum Operating Temperature -40°C | ||
Series FPDB60PH | ||
Height 5.7mm | ||
Length 44.2mm | ||
Standards/Approvals No | ||
Width 27 mm | ||
Maximum Operating Temperature 150°C | ||
Automotive Standard No | ||
- COO (Country of Origin):
- CN
The FPDB60PH60B is an advanced PFC SPM® 3 module providing a fully-featured, high-performance Bridgeless PFC (Power Factor Correction) input powerstage for consumer, medical, and industrial applications. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockout, over-current shutdown, thermal monitoring, and fault reporting. These modules also feature high-performance output diodes and shunt resistor for additional space savings and mounting convenience.
600 V - 60 A 2-Phase Bridgeless PFC with Integral Gate Driver and Protection
Very Low Thermal Resistance Using AlN DBC Substrate
Built-in NTC Thermistor for Temperature Monitoring
Built-in Shunt Resistor for Current Sensing
Optimized for 20kHz Switching Frequency
Isolation Rating: 2500 Vrms/min.
Motion Control - Home Appliance/Industrial Motor