Festo G 1/2 Pneumatic Regulator - 0.3bar to 7bar, 1/2in, 14bar max. input, 529991

Keep your system's pressure in check with this pneumatic regulator from Festo. When it senses the pressure is at a pre-set level, it immediately cuts off the air supply to hold things steady. Controlling the unit's a breeze thanks to the front-facing rotary knob that lets you easily adjust the setting. You can keep a close eye on the built-in analogue gauge on the front to make sure your system is ticking over as it should.

• PE filter traps contaminants to prevent dirt build-up
• Standard nominal flow rate of 6,500L/min for safe use in high-flow pneumatic systems
• Durable die-cast aluminium housing resists corrosion
• Lockable control knob helps prevent tampering
• Lubricated operation possible to minimise the risk of friction and damage caused by wear

• Water treatment facilities
• Laboratories
• Oil and gas industry

The pressure setting range is between 0.3 and 7 bar, so you'll find this unit's the right tool for keeping your low-pressure system in line.

Yes, this regulator's sealed. It comes with robust NBR rings to prevent leakage.

Regulators and Filter Regulators