- RS Stock No.:
- 177-3548
- Mfr. Part No.:
- KSZ9031RNXCC
- Brand:
- Microchip
1040 In Global stock for delivery within 10 working day(s)
Added
Price (ex. GST) Each (In a Tray of 260)
$5.055
(exc. GST)
$5.561
(inc. GST)
Units | Per unit | Per Tray* |
260 - 1040 | $5.055 | $1,314.30 |
1300 + | $4.549 | $1,182.74 |
*price indicative |
- RS Stock No.:
- 177-3548
- Mfr. Part No.:
- KSZ9031RNXCC
- Brand:
- Microchip
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- TW
Product Details
The KSZ9031 reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating an LDO controller to drive a low-cost MOSFET to supply the 1.2V core.
Single-chip 10/100/1000Mbps Ethernet transceiver
KSZ9031Mxx feature GMII/MII standard interface with 3.3V/2.5V/1.8V tolerant I/Os
KSZ9031Rxx feature RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths
GMII/MII/RGMII with 3.3V/2.5V/1.8V tolerant I/Os
Auto-negotiation to automatically select the highest linkup speed (10/100/1000Mbps) and duplex (half/full)
On-chip termination resistors for the differential pairs
On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core
Jumbo frame support up to 16KB
125MHz Reference Clock Output
Energy-detect power-down mode
KSZ9031Mxx feature GMII/MII standard interface with 3.3V/2.5V/1.8V tolerant I/Os
KSZ9031Rxx feature RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths
GMII/MII/RGMII with 3.3V/2.5V/1.8V tolerant I/Os
Auto-negotiation to automatically select the highest linkup speed (10/100/1000Mbps) and duplex (half/full)
On-chip termination resistors for the differential pairs
On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core
Jumbo frame support up to 16KB
125MHz Reference Clock Output
Energy-detect power-down mode
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Specifications
Attribute | Value |
---|---|
Standard Supported | 1000BASE-T, 100BASE-TX, 10BASE-T, IEEE 802.3 |
Number of Channels per Chip | 1 |
Typical Data Rate | 1000Mbit/s |
Power Supply Type | Single |
Typical Operating Supply Voltage | 3.3 V |
Mounting Type | Surface Mount |
Package Type | QFN |
Pin Count | 48 |
Dimensions | 7 x 7 x 0.8mm |
Maximum Operating Temperature | +70 °C |
Automotive Standard | AEC-Q100 |
Minimum Operating Temperature | 0 °C |
Related links
- Microchip KSZ9021RNI
- Microchip KSZ8721BLI
- FTDI Chip Multiprotocol Transceiver 48-Pin QFN, FT232HQ-REEL
- Microchip KSZ8041TLI
- Silicon Labs EFR32MG1P133F256GM48-C0 RF Transceiver, 48-Pin QFN
- Microchip KSZ9031RNXIC
- Microchip Ethernet Transceiver 48-Pin QFN, KSZ9021RN
- Silicon Labs EFR32BG1P233F256GM48-C0 RF Transceiver, 48-Pin QFN