Keysight Technologies N2790A Oscilloscope Probe, Probe Type: Differential, High Voltage 100MHz 1.4kV 1:50, 1:500

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): JP
Product Details

Keysight Technologies Oscilloscope Probe

The Keysight Technologies oscilloscope probe offers conventional earth-grounded Keysight oscilloscopes to be used for floating signal measurements of up to 1400V of differential voltage and 1000V of common-mode voltage. It offers sufficient dynamic range and bandwidth for your application to make the floating measurements found in power electronics circuits safely and accurately.
It also has an over-range indicator which alerts the user when the probe input exceeds the dynamic range of the probe. It is compatible with InfiniiVision 5000, 6000 (except 100MHz) and 7000 Series (with version 5.26.0001 software), Infiniium 8000, 54830 Series (with version 5.7 software) and Infiniium 9000 Series (with version 2.0 software). Each of these scopes can support four N2790A probes.
Supplied with browser tips (2), alligator plunger clips (2), pincer clips (2), coloured ID tags (2 off each of 4), DC offset adjustment tool, manual

Features and Benefits

Bandwidth is DC to 100MHz (–3dB)
Attenuation ratio is 50:1/500:1
Input impedance is 4Mohm ll7pF each side to ground
Differential range is (50:1) 140±V (DC + peak AC)
Maximum differential is (500:1) ±1400V (DC + peak AC)
Common mode range is ±1000V (CAT II) or ±600V (CAT III)
Absolute maximum voltage is±1500VDC Peak AC differential mode ±1300Vrms (CAT II) common mode
Offset (typical) is adjustable
Source input impedance is 1Mohm Autoprobe interface
AC CMRR (typical) is -80dB at 50/60Hz and -50dB at 1MHz
Ambient operating temperature ranges between -10°C and 50°C
Power requirement 4xAA cells

Certifications

IEC61010-031
CAT II 1000V, CAT III 600V

Specifications
Attribute Value
Probe Type Differential, High Voltage
Attenuation 1:50, 1:500
Bandwidth 100MHz
Maximum Common Mode Input Voltage 1.4kV
Connector Type BNC
Model Number p N2790A
Safety Category Level CAT II, CAT III
Safety Category Voltage 600 V, 1000 V
Series N
Safety Category CAT II 1000 V, CAT III 600 V
Rise Time 3.5ns
Temporarily out of stock - back order for despatch 15/12/2020, delivery within 1 working days from despatch date.
Price (ex. GST) Each
$ 3,051.64
(exc. GST)
$ 3,356.80
(inc. GST)
units
Per unit
1 +
$3,051.64
Related Products
The Tektronix MDO3000 series 500MHz mixed domain oscilloscope ...
Description:
The Tektronix MDO3000 series 500MHz mixed domain oscilloscope offers a 9inch WVGA widescreen colour display This product has 4 analogue channels. This oscilloscope is multi-functional with an integrated basic spectrum analyser, wave inspector navigation, MSO, serial and parallel bus triggering ...
The Teledyne Le Croy oscilloscope probe is affordable ...
Description:
The Teledyne Le Croy oscilloscope probe is affordable and optimally designed for measurement of small signals floating on an HV bus in power electronics designs or for EMC, EFT, ESD and RF immunity testing sensor monitoring It far surpasses the ...
The Digilent BNC terminated oscilloscope probe is perfect ...
Description:
The Digilent BNC terminated oscilloscope probe is perfect to use with the Analogue Discovery™ in conjunction with the Discovery BNC adapter Bandwidth for 1x DC to 6MHz and 10x DC to 100MHz Selectable 1X/10X input attenuation Input resistance is 1x1Mohm ...
The Rohde & Schwarz RT-ZHD ±1500V high voltage ...
Description:
The Rohde & Schwarz RT-ZHD ±1500V high voltage differential probe with 100MHz bandwidth is ideal for measurements on fast-switching semiconductors Its extraordinarily low added noise results in high-quality measurements. Fully integrated into the oscilloscope, the probe can be remote controlled ...