Unipower 8 A Motor Load Monitor, 120 575 V ac, -15 +50 °C

  • RS Stock No. 245-5957
  • Mfr. Part No. HPL110A
  • Manufacturer Unipower
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DK
Product Details

Digital Motor Load (kW) Monitors

Units which measure true motor load in kW featuring a digital display of kW% and programmable trips for over and/or under load events.These units protect equipment from damage caused by the motor running against a jam, blockage or under load and are also used in processes to trigger subsequent actions when predetermined load levels are reached (end point monitoring).The display is used as a reference enabling motor load, trip levels and all other variables to be displayed and programmed quickly and accurately using only three push buttons.The units are usually mounted in the motor control panel and are connected to a convenient point on the motor supply (before Inverter - if used).Therefore no external field wiring or sensors in the equipment are necessary.

In addition to displaying motor power in real time the units capture and, on demand, display the instantaneous minimum and maximum power levels to assist in setting up and fault diagnosis.Three digital delay timers, programmable from 0.1-25 seconds are incorporated to time out motor start surge and short duration over and under power events which could cause nuisance tripping.A DIP switch is used to tamper proof all settings. The HPL110 and HPL110A can be switched to either 50 or 6necessary.In0Hz operation.Both units can be operated in manual or auto-reset modes. In auto-reset mode programmable hysteresis, which provides differential between trip and reset levels is automatically enabled.The HPL 110 is DIN rail mounting whilst the HPL110A can be panel mounted.Applications include the over/underload protection of:Pumps (dry run, closed valve), Fans (broken belt, closed damper), Conveyors (screw and belt),Separation screens, Macerators, scrapers, Mechanical drives (gearboxes, chains)

//media.rs-online.com/t_line/L245594-01.gif
Specifications
Attribute Value
Motor Protection Component Load Monitor
Supply Voltage 120 575 V ac
Current Rating 8 A
Overall Length 72mm
Overall Width 72mm
Overall Depth 112mm
Minimum Operating Temperature -15°C
Maximum Operating Temperature +50°C
Control Voltage 100 575 V
Enclosure Type Din Rail, Wall Mount
Series HPL
2 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 980.75
(exc. GST)
$ 1,078.83
(inc. GST)
units
Per unit
1 +
$980.75
Related Products
E720 and E740 Series - Single Phase Input, ...
Description:
E720 and E740 Series - Single Phase Input, Three Phase Output What is the E720 and E740 range? The FR – E700 SC Frequency Inverter range sits within the Compact Drive Solution series and has been designed and created to ...
D740-SC Three Phase Inverter Drives What is the ...
Description:
D740-SC Three Phase Inverter Drives What is the D740-SC range? • Simple cabling, the integrated spring clamps connect control and power lines quickly which ensures simple cabling and reliability• Easy parameterization software FR-Configurator which allows for easy functions such as ...
D720-SC Single Phase Frequency Inverters What is the ...
Description:
D720-SC Single Phase Frequency Inverters What is the D720-SC range? The D700 is an ultra-compact, micro drive solution inverter drive range, designed for simple installation and set-up Features and Benefits • Simple cabling, the integrated spring clamps connect control and ...
Quantifying the status of a three-phase induction motor ...
Description:
Quantifying the status of a three-phase induction motor and pump The alarm output threshold default is set. You can customize the value according to the site. As for comprehensive current diagnosis, the degradation can be detected comprehensively by combining each ...