Infineon BTN7970BAUMA1, BLDC Motor Driver IC, 18 V 50A 7-Pin, TO-263

  • RS Stock No. 726-4068
  • Mfr. Part No. BTN7970BAUMA1
  • Manufacturer Infineon
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Motor Driver ICs, Infineon

Infineon offer a variety of drivers that offer a solution for motor controls and drives. The selection includes Integrated Full-Bridge, Powertrain H-Bridge, TrilithIC, NovalithIC as well as Servo and Stepper motor drivers.The H-bridge is suited to applications such as DC brush motors. The TrilithIC integrates two high-side and two low-side switches which are meant to drive high-current DC motors in an H-bridge arrangement. Infineon’s single half-bridge drivers like NovalithIC are intended for automotive and industrial demands. Whereas the servo driver is widely used in head light beam control and the Stepper motor driver is for driving bipolar stepper motors.

Trilith ICs include overcurrent and over-temperature protection for the high-side switches
All Servo Drivers offer over temperature and over current protection as well as over and under voltage lockout except the TLE4205G (462-7823)

Motor Controllers & Drivers, Infineon

Specifications
Attribute Value
Motor Type BLDC
Output Configuration Half Bridge
Maximum IGBT Collector Current 50A
Maximum Collector Emitter Voltage 18 V
Mounting Type Surface Mount
Package Type TO-263
Pin Count 7
Maximum Operating Supply Voltage 18 V
Minimum Operating Supply Voltage 8 V
Typical Switching Frequency 25kHz
Dimensions 10 x 9.25 x 4.4mm
Minimum Operating Temperature -40 °C
Width 9.25mm
Length 10mm
Maximum Operating Temperature +150 °C
Height 4.4mm
296 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 11.26
(exc. GST)
$ 12.39
(inc. GST)
units
Per unit
1 - 9
$11.26
10 - 49
$10.36
50 - 99
$9.63
100 - 249
$9.15
250 +
$8.79
Packaging Options:
Related Products
BD62222HFP is full bridge driver for brush motor ...
Description:
BD62222HFP is full bridge driver for brush motor applications. This IC can operate at a wide range of power-supply voltages (from 6V to 27V), supporting output currents of up to 2.5A. MOS transistors in the output stage allow for PWM ...
The Intelligent Power Module (IPM) is a fully ...
Description:
The Intelligent Power Module (IPM) is a fully integrated three phase inverter power stage. It is best suited for driving permanent magnet synchronous motors (PMSM), brushless-DC (BLDC) motors and AC asynchronous motors. 3-Phase IGBT Motor Drive module with integrated driversThree ...
The MAX6650/MAX6651 fan controller with tachometer, controls the ...
Description:
The MAX6650/MAX6651 fan controller with tachometer, controls the fan speed of 5 V/12 V brushless fans using tachometer frequency output. The fan speed is forced to match the recommended preprogrammed fan speed in the Fan-Speed Register. In the case of ...
The ROHM 10-pin motor driver is a full ...
Description:
The ROHM 10-pin motor driver is a full bridge, HSIP package up to 2.2A output current IC. The output modes are of four types: normal, reverse, stop (idling) and braking per input logic (2 inputs). The output voltage can be ...