JG Speedfit MDPE Pipe Fitting 22mm, 12 bar

  • RS Stock No. 756-539
  • Mfr. Part No. TSM22N
  • Manufacturer JG Speedfit
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Pipe Inserts - Speedfit

Use on all Speedfit Barrier Pipe installations

Maximum working pressure: 12 bar @ 20°C, 6 bar @ 65°C and 3 bar @ 92°C

Max. Working Pressure: 12 Bar @ 20°C, 6 Bar @ 65°C, 3 Bar @ 92°C

Caution

DO NOT USE FOR: Gas, fuel oil or compressed air applications

Standards

BS EN ISO 9001: BS 7291 Parts 1 & 3 Class S

Approvals

Approved to WRC, BBA, PKM, PEM

Approvals

WRC; BBA; PKM; PEM

Standards

BS EN ISO 9001; BS 7291 Parts 1 & 3 Class S

SpeedFit Tube, Conduits & Tube Inserts

Pipe Suitability - Speedfit fittings can be used with: Copper pipe to BS2871 Part 1 / BSEN 1057: 1996, Speedfit cross linked polyethylene (PEX) Barrier Pipe to BS7291. Speedfit fittings cannot be used on stainless steel pipe.,Applications - Mains fed and indirect cold water systems, vented and unvented hot water systems and vented and sealed central heating systems.,Material - Polysulfone, Acetal

Specifications
Attribute Value
Compatible Pipe Size 22mm
Series Speedfit Pipe
Maximum Working Pressure 12 bar
320 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Pack of 10)
$ 0.693
(exc. GST)
$ 0.762
(inc. GST)
units
Per unit
Per Pack*
10 - 40
$0.693
$6.93
50 - 90
$0.64
$6.40
100 - 240
$0.608
$6.08
250 +
$0.578
$5.78
*price indicative
Related Products
The Pegler Yorkshire 28mm copper S1 straight coupling ...
Description:
The Pegler Yorkshire 28mm copper S1 straight coupling is used with hard and half-hard copper tubes. This product is suitable for joining copper. It has a press-fit x press-fit connection type. • Ambient temperature ranges between 15°C and 95°C• Clean, ...
PVC- U tee installation fittings with a BSP ...
Description:
PVC- U tee installation fittings with a BSP thread and FPM O-ring seal. Ideal for installing measurement and flow sensing equipment into PVC-U pipelines and for use in water treatment and chemical process industries.
Speedfit manufacture a wide range of connectors including ...
Description:
Speedfit manufacture a wide range of connectors including conventional straight and bent tap connectors. The tap connector only requires a simple hand tightening to connect up a terminal tap, mixer or a float valve. An integral seal within the fitting ...
The John Guest system of push-in fittings and ...
Description:
The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points. No need to prepare threaded ...