Legris High Pressure Ball Valve Brass 3/4 in G 2 Way

  • RS Stock No. 231-5152
  • Mfr. Part No. 6402 20 27
  • Manufacturer Legris
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Panel Mountable

Mountable in-line ball valve for closing fluid systems with a simple quarter turn of the handle

full flow
Optimum sealing due to compensating "O" rings
Excellent resistance to scaling due to ball seal configuration


Ball Valve, Standard, Padlockable and Panel Mount

These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.

Attribute Value
Attachment Type Threaded
Threaded Connection 3/4 in G
Body Material Brass
Thread Size 3/4in
Safe for Use With Water
Maximum Working Pressure 40 bar
Connection Size mm 20mm
Connection Size inch 3/4in
Type 2 Way
12 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 144.64
(exc. GST)
$ 159.10
(inc. GST)
Per unit
1 - 5
6 - 11
12 +
Related Products
A high temperature, 3 piece ball valve which ...
A high temperature, 3 piece ball valve which guarantees continuous saturated steam service up to 250 psi (17 bar) It has a mounting platform on the body for ease of ancillary mounting while retaining valve integrity. Also incorporated into the ...
A 2/2 way ball valve with a hand ...
A 2/2 way ball valve with a hand lever and female thread at both ends Available in a range of thread sizes from G G1. Female thread with hand lever Air and water operating mediums Brass housing Large operating temperature ...