TE Connectivity Straight, Fluid Resistant Elastomer Adhesive Lined, 43mm
- RS Stock No.:
- 718-2904
- Mfr. Part No.:
- 202K163-25/86-0
- Brand:
- TE Connectivity
This image is representative of the product range
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 718-2904
- Mfr. Part No.:
- 202K163-25/86-0
- Brand:
- TE Connectivity
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | TE Connectivity | |
| Type | Straight | |
| Inside Diameter Primary | 43mm | |
| Inside Diameter Secondary | 43mm | |
| Adhesive Lined | Yes | |
| Material | Fluid Resistant Elastomer | |
| Number of Breakouts | 1 | |
| Minimum Operating Temperature | -30°C | |
| Maximum Operating Temperature | +105°C | |
| Shrunk Diameter Primary | 28.2mm | |
| Shrunk Diameter Secondary | 9.9mm | |
| Series | 202K1 | |
| Select all | ||
|---|---|---|
Brand TE Connectivity | ||
Type Straight | ||
Inside Diameter Primary 43mm | ||
Inside Diameter Secondary 43mm | ||
Adhesive Lined Yes | ||
Material Fluid Resistant Elastomer | ||
Number of Breakouts 1 | ||
Minimum Operating Temperature -30°C | ||
Maximum Operating Temperature +105°C | ||
Shrunk Diameter Primary 28.2mm | ||
Shrunk Diameter Secondary 9.9mm | ||
Series 202K1 | ||
- Moulded Boot Straight size 63
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
Ready Coated General Purpose (Lipped) - 202K1 and 222K1 Series
High performance pre-coated epoxy adhesive option on the 202K straight and 222K right angled boots (-25 Fluid resistant modified elastomer).