Honeywell Ratiometric Hall Effect Sensor switching current 1.5 mA supply voltage 4.5 → 10.5 V dc

  • RS Stock No. 216-6247
  • Mfr. Part No. SS495A1
  • Manufacturer Honeywell
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Miniature Ratiometric Linear Hall Effect Sensors

Hall effect sensors with output proportional to supply voltage and the strength of the magnet field
Single current sinking or current sourcing linear output
Rail-to-rail operation provides more useable signal for higher accuracy
Responds to either positive or negative gauss
Good temperature stability
Typical applications include; current sensor, motor control, position control, encoder, metal detection, vibration sensor etc

Specifications
Attribute Value
Output Type Ratiometric
Body Style Block
Mounting Style Surface Mount
Supply Voltage 4.5 → 10.5 V dc
Terminal Type PCB
Switching Current 1.5 mA
Length 4.06mm
Width 3mm
Depth 1.6mm
Dimensions 4.06 x 3 x 1.6 mm
Maximum Operating Temperature +150°C
Minimum Operating Temperature -40°C
On back order for despatch 07/05/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 7.33
(exc. GST)
$ 8.06
(inc. GST)
units
Per unit
1 - 9
$7.33
10 - 49
$6.17
50 +
$5.86
Related Products
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed Three-pin in-line PCB terminals, 0.1in spacing Laser trimmed thin and thick film resistors-40 to 125°C operating ...
Contact-free, bounce-free switching Impervious to shocks and vibrations ...
Description:
Contact-free, bounce-free switching Impervious to shocks and vibrations Continuous short-circuit and overload proof High switching frequency → 5000 Hz3 m PUR connection cable Temperature range: -20 °C → +70 °CHigh IP67 protection rating
M8 inductive sensor, non flush-mountable"Normally open" PNP switching ...
Description:
M8 inductive sensor, non flush-mountable"Normally open" PNP switching function.Equipped with a red LED status display.Protected against short circuits and polarity reversal.Connected via M8 screwed connector, axial output.
M8 sealed inductive sensor, ultra-miniature for flush mounting"Normally ...
Description:
M8 sealed inductive sensor, ultra-miniature for flush mounting"Normally open" PNP switching function.Equipped with a red LED status display.Protected against short circuits and polarity reversal.Connected via 2 metre PUR cable or via M8 screwed connector, axial output.