WIZnet Inc RTL8201CP-VD-LF, Ethernet Controller, 3 V 100 Mbps, 48-Pin 3.6 V LQFP

This image is representative of the product range

View all Ethernet Interface Ics
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
RS Stock No.:
419-952
Mfr. Part No.:
RTL8201CP-VD-LF
Brand:
WIZnet Inc
Find similar products by selecting one or more attributes.
Select all

Brand

WIZnet Inc

Product Type

Ethernet Controller

Maximum Data Rate

100Mbps

Sub Type

Controller

Communication Mode

Full Duplex/Half Duplex

Loopback Mode

External, Internal

Standard Supported

IEEE 802.3u

Mount Type

Surface

Package Type

LQFP

Pin Count

48

Maximum Supply Voltage

3.6V

Minimum Operating Temperature

0°C

Maximum Operating Temperature

70°C

Width

9 mm

Minimum Supply Voltage

3V

Standards/Approvals

No

Length

9mm

Height

1.7mm

Supply Current

10μA

Automotive Standard

No

Embedded Ethernet Controllers


WIZnet's range of Embedded Ethernet controller Chips, which inlcudes the following:

RTL8201CP-VD-LF is a single chip/single port PHYceiver with an MII (Media Independent interface)/SNI(Serial Network Interface) and implements all 10/100M Ethernet Physical-layer functions. A PECL interface is supported to connect with an external 100Base-FX fiber optic tranceiver

W3100A-LF is a fully hardwired TCP/IP stack supporting TCP, UDP, IP, ARP, ICMP, MAC internet protocols. Features include amazing protocol processing speed depending upon MCU); 8051 (max. 1Mbps), AVR (max.8 Mbps), ARM7 (max. 21Mbps)

W3150A+ is a fully hardwired TCP/IP stack with support for ADSL connection (with PPPoE) and TCP, UDP, IP, ARP, ICMP, IGMP, PPPoE, MAC protocols. Features include High Throughput speeds; 8051(max. 1Mbps), AVR (max. 8Mbps), ARM7 (max. 21Mbps) and 10/100 Base-T Ethernet (Auto detection) support

W5100 is a fully hardwired TCP/IP stack with support for TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE protocols. Features include 10BaseT/100BaseTX Ethernet MAC/PHY embedded support and ADSL connection (with PPPoE Protocol with PAP/CHAP Authentication mode)

W5300 is designed for Internet embedded applications. The full hardware logic integrates 10/100 Ethernet controller, MAC, and TCP/IP with communication protocols such as TCP, UDP, IPv4, ICMP, IGMP, ARP and PPPoE. The data communication memory is extended to 128Kbyte and supports 16-bit bus interface.

Related links