Digilent 410-299 for use with JTAG-HS3, Xilinx Tool

  • RS Stock No. 134-6435
  • Mfr. Part No. 410-299
  • Manufacturer Digilent
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

JTAG-HS3 FPGA Programming Cable

The JTAG-HS3 programming cable allows high-speed programming/debugging of Xilinx FPGA and SoC devices from a host PC.

Features

• Separate Vref drives JTAG signal voltages
• Vref can be any voltage between +1.8V and +5V
• USB 2.0 HS port drives JTAG bus at up to 30Mbit/sec
• Compatible with Xilinx ISE 14.1 and newer
• Compatible with Xilinx Vivado 2013.3 and newer
• PC connector: MicroUSB
• JTAG connector: 2 x 7-pin 2mm
• Open-drain buffer on pin 14 allows processor reset of Xilinx Zynq platform

Supported Target Devices

• Xilinx FPGAs • Xilinx Zynq-7000
• Xilinx CoolRunner™/CoolRunner-II CPLDs
• Xilinx Platform Flash ISP configuration PROMs
• Selected third-party SPI PROMs
• Selected third-party BPI PROMs

Target Devices Not Supported

• Xilinx 9500/9500XL CPLDs • Xilinx 1700 and 18V00 ISP configuration PROMs
• Xilinx FPGA eFUSE programming

Note

This cable is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.

Supplied with

USB cable

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specifications
Attribute Value
For Use With JTAG-HS3, Xilinx Tool
124 In stock for delivery within 7 working day(s) (Global Stock)
Price (ex. GST) Each
$ 82.60
(exc. GST)
$ 90.86
(inc. GST)
units
Per unit
1 +
$82.60
Related Products
MIPI DSI Interface TFT LCD Board The B-LCD40-DSI1 ...
Description:
MIPI DSI Interface TFT LCD Board The B-LCD40-DSI1 daughterboard is an optional capacitive touchscreen display board that can be used with a Discovery development kit such as the STM32F769I-DISC1 Two interface adapters are also available. 4in TFT LCD touchscreen display ...
Microchip MPLAB ICD 4 The Microchip MPLAB ICD ...
Description:
Microchip MPLAB ICD 4 The Microchip MPLAB ICD 4 in-circuit debugger is a straight-forward and really fast debugging and programming tool It is designed to work with the Microchip range of PIC microcontrollers, dcPIC Digital Signal Controllers and CEC flash ...
Description:
x Chip Boards x Chips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, ...
Description:
x Chip Boards x Chips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, ...