- RS Stock No.:
- 131-1335
- Mfr. Part No.:
- 8.07.00 JTAG Isolator
- Brand:
- SEGGER
10 In Global stock for delivery within 10 working day(s)
Added
Price (ex. GST) Each
$381.72
(exc. GST)
$419.89
(inc. GST)
Units | Per unit |
1 - 4 | $381.72 |
5 + | $343.56 |
- RS Stock No.:
- 131-1335
- Mfr. Part No.:
- 8.07.00 JTAG Isolator
- Brand:
- SEGGER
Technical data sheets
Legislation and Compliance
Product Details
J-Link ARM JTAG Isolator Board
The J-Link JTAG Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin JTAG-ARM connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.
Compatible Probes
J-Link BASE 131-1319, J-Link PRO, J-Link ULTRA+, J-Link PLUS , Flasher Portable, Flasher ARM
Features
1kV DC optical isolation
+3.3V and +5Vdc target operation supported
Powered from probe and target
JTAG 20-pin connection with TRST, TDI, TMS, TCK, RTCK, TDO and RESET signals
Power consumption on target side: 35mA typical
JTAG frequency: Up to 4MHz
3 x LEDs: Probe Power, Target Power and Target RESET
+3.3V and +5Vdc target operation supported
Powered from probe and target
JTAG 20-pin connection with TRST, TDI, TMS, TCK, RTCK, TDO and RESET signals
Power consumption on target side: 35mA typical
JTAG frequency: Up to 4MHz
3 x LEDs: Probe Power, Target Power and Target RESET
Specifications
Attribute | Value |
---|---|
Product Type | Programmer |
Kit Name | J-Link ARM JTAG Isolator Board |
For Use With | J-Link Probes |