Recently searched

    Glenair, HX4 Crimp Tool Die, Coaxial, Coaxial Type BT2003, Hex size 0.296in

    RS Stock No.:
    425-6162
    Mfr. Part No.:
    Y1829
    Manufacturer:
    Glenair
    Glenair

    This image is representative of the product range

    View all Crimping Dies
    Discontinued product
    RS Stock No.:
    425-6162
    Mfr. Part No.:
    Y1829
    Manufacturer:
    Glenair

    RoHS Status: Not Applicable

    Legislation and Compliance

    RoHS Status: Not Applicable


    Product Details

    HX4 Crimp Tool Die Sets


    The proven HX4 (M22520/5-01) ratchet crimp tool frame with interchangeable coaxial connector crimp die sets, eliminates the need for separate dedicated crimp tools. Crimp dies are snapped into the frame and retained with internal spring clips.

    A selection of dies are available separately to accommodate most coaxial contacts conforming to MIL-C-39012, MIL-C-39029 and numerous proprietary configurations. Die set 425-6162 is designed specifically to terminate BT2003 RS crimp plugs and jacks for cable group H
    Operating instructions and die remover included with tool frame

    Note

    Users should take care when selecting tooling to confirm that the die set aperture dimensions are compatible with the connector being used, and that the cable type is also compatible.


    General Support Tooling


    The crimp tooling detailed on this and subsequent pages are recommended, in most cases, for a wide range of connectors and associated cable types. The 'Crimp Tool Selection Guide' table indicates the cable type(s) and/or specific type(s) of connector for which each tool is recommended. The 'Die Set Selection Guide' table indicates compatible cable types and their 'Group number' and details of frame tool required. A small number of crimp tools have been considered to be 'dedicated' to a connector type. These tools have been incorporated with those connector ranges on respective pages, and are not included within this General Tooling Range.

    Specifications

    AttributeValue
    Crimp Connector TypeCoaxial
    Hex Size0.296 in, 0.68in
    Coaxial TypeBT2003
    SeriesHX4
    Discontinued product