Lapp ÖLFLEX CLASSIC 100 CY Control Cable, 3 Cores, 2.5 mm², CY, Screened, 50m, Transparent PVC Sheath, 13 AWG

ÖLFLEX® Classic 100 CY cables are a screened connecting and control cable for flexible use and fixed installation for medium mechanical use. They are for use in dry, damp and wet rooms. They can only be installed outdoors with UV protection and in observation of the temperature range. At room temperature, it is resistant against acids, caustics solutions and certain oils. ÖLFLEX® Classic 100 CY cables are used as supply and interconnecting cable for controlling machine tools, production lines, control equipment on conveyors. ÖLFLEX® 100 CY cables can also be used in measuring regulating and computer units. The screen is a protection against electrical interference

• Design: in accordance to HD 21.13S1 that is VDE 0281-13
• Conductor: bare copper, fine wire strand in accordance to IEC 60 228 that is VDE 0295, class 5
• Core insulation: LAPP special PVC compound P8/1, better than the PVC compound TI2 in accordance to VDE 0207 part 4
• Identification: up to 5 cores are colour coded in accordance to HD 186 resp. VDE 0293, with green/yellow ground conductor
• Inner sheath: PVC compound TM2 in accordance to VDE 0281-1
• Screen: Braid of tinned copper, coverage 85%. Transfer impedance in accordance to HD21.13 S1 250mΩ/m at 30 MHz
• Outer sheath: PVC compound TM2 in accordance to VDE 0207 part with increased request to LAPP specification
• Minimum bending radius: flexible use 20 x cable diameter; fixed use 6 x cable diameter
• Flame retardant: in accordance to IEC 60 332.1
• Tests: in accordance to IEC 60 811 resp. VDE 0472 and VDE 0473
• EC directive: This cable confirms to ECD 73/23/EEC (low voltage directive)

This cable confirms to ECD 73/23/EEC (low voltage directive).

BS 6360 Class 5, VDE 0295 Class 5, VDE 0245/0281 (Conductor); VDE 0293, BS 6500 (Colour Code); VDE 0245/0281 (Sheath)