Schneider Electric TeSys K LP1K Contactor, 24 V dc Coil, 3-Pole, 9 A, 4 kW, 3NO, 600 V ac

TeSys K Silent Miniature Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The LP1K range are DC operated contactors recommended for use in areas sensitive to noise and high interference mains supplies. The TeSys K contactors offer quick simple setup while maintaining compliance with international standards. A special armature structure design allows all devices in the range to have the same physical size and panel footprint for convenience.

• Built-in auxiliary contacts for added switching capability
• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
• Can be panel mounted with screws or DIN Rail mounted
• Coil with rectifier incorporated
• Easily installed accessories
• Instantaneous auxiliary contact
• Flexible control circuit to suit a wide range of applications
• High-fault short circuit current ratings provide the flexibility to select any component

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.

The LP1K series is suitable up to a maximum of 440 V ac in category AC4.

Yes the TeSys K range uses linear translation movement that provides double breaking of the poles.

The LP1K0910BD3 is a miniature 3 pole contactor featuring a 24 V dc operating coil, an AC-3 full load current of 9 A and a normally open auxiliary contact.

• 3P configuration for circuit connections
• 9A rating enhances compatibility with diverse loads
• 4kW power rating supports high power applications
• Auxiliary contactor configuration allows for flexible usage
• Screw clamp terminals simplify installation and maintenance
• Compact dimensions enable space-saving installations

• Used for motor control in industrial machinery
• Suitable for resistive and inductive load switching
• Ideal for building automation systems
• Employed in HVAC equipment controls
• Utilised in safety and security systems

Yes, it operates between -25°C and +50°C.

Yes, it can operate in AC-1, AC-3, and AC-4 categories.

Yes, it supports both plate and rail mounting options.