Parallax Inc XBee USB RF Transceiver Adapter Board for XBee Modules 32400

The Parallax Inc RF Transceiver Adapter Board comes in a partially assembled kit form and provides a cost-effective solution to interfacing a PC or microcontroller to any XBee or XBee Pro module. The PC connection can be used to configure the XBee Module through Digi's X-CTU software. This adapter board can provide an easy interface to the XBee or XBee Pro modules by converting the 2mm pin spacing to breadboard-friendly 0.100” spacing. The adapter board also provides a way to connect pluggable wires or solder connections and also provides mounting holes.

4 status indicator LEDs for Power, RSSI, Associate and mode (sleep/ON)
Communication is between serial pass through and XBee module
Converts XBee 2mm pin spacing to 0.100” pin spacing
Includes mounting holes
Operating temperature ranges between -40°C and +70°C
Partially assembled kit form for flexible configuration
Pin-out compatible with our other XBee Adapter boards
Provides an easy interface for configuring an XBee Module via a PC
Provides easy pluggable wire or solder connections

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007