Recently searched

    Pycom SiPy IoT RCZ2/4 Bluetooth Smart (BLE), SigFox, WiFi Development Board SiPy RCZ2 & RCZ4

    RS Stock No.:
    125-9540
    Mfr. Part No.:
    SiPy RCZ2 & RCZ4
    Manufacturer:
    Pycom
    Pycom
    View this category
    83 In Global stock for delivery within 10 working day(s)
    Add to Basket
    units

    Added

    Price (ex. GST) Each

    $40.48

    (exc. GST)

    $44.53

    (inc. GST)

    unitsPer unit
    1 +$40.48
    RS Stock No.:
    125-9540
    Mfr. Part No.:
    SiPy RCZ2 & RCZ4
    Manufacturer:
    Pycom
    COO (Country of Origin):
    CN

    Technical data sheets


    Legislation and Compliance

    COO (Country of Origin):
    CN

    Product Details

    Pycom SiPy MicroPython WiFi/Bluetooth/Sigfox Development Board


    The SiPy is a MicroPython enabled WiFi, Bluetooth and Sigfox development board designed specifically for IoT applications. At its heart is the Espressif ESP32 System on Chip (SoC) featuring a dual-core microcontroller, WiFi, Bluetooth, Sigfox and 512 KB RAM. All this power packed into a board measuring just 55 x 20 x 3.5 mm!

    Knowledge of Python on a PC or Mac transfers directly to working with MicroPython and SiPy so the learning curve is minimal. Pycom have developed an intuitive API to help you get the most out of your board.

    NOTE: An external antenna is required for the SiPy and using without an antenna can damage the device. The Pycom Antenna Kit is recommended and available from RS 125-9535.

    Two versions are available depending on your location:

    SiPy RCZ1/RCZ3 Europe / Japan / Korea - RS 125-9533
    SiPy RCZ2/RCZ4 America, Australia, New Zealand, SE Asia - RS 125-9540


    Integrated SoC with a powerful CPU, Bluetooth (Classic and BLE) and WiFi
    Up to 1 km WiFi range
    Network processor handles the WiFi connectivity and the IPv6 stack leaving the main processor free to run your application
    Texas Instruments CC1125 High performance RF transceiver
    Internal WiFi and Bluetooth Antenna and U.FL connector for external Sigfox antenna
    2 x UART, 2 x SPI, I2C, I2S, micro-SD card, 8 x 12-bit ADCs, Up to 24 GPIO
    WS2812 RGB multi-colour LED
    Reset and RF switches
    Compatible with standard breadboards using headers (RS 102-9147). Pycom offer an expansion board (RS 125-9534) featuring a micro-USB connector, button, LED and battery connector.
    ULP-coprocessor monitors GPIOs, ADC channels and internal peripherals during deep-sleep mode while only consuming 25 uA
    Size: 55 x 20 x 3.5 mm
    Operating temperature: -40°C to 85°C


    Power


    Input: 3.3 V to 5.5 V
    WiFi: 12 mA in active mode, 5 uA standby
    SiPy RCZ1/RCZ3 Europe / Japan / Korea: 17 mA in Rx mode, 47 in Tx mode and 0.5 uA in standby (RS 125-9533)
    SiPy RCZ2/RCZ4 America, Australia, New Zealand, SE Asia: 24 mA in Rx mode, 257 mA in Tx mode and 0.5 uA in standby (RS 125-9540)


    Sigfox Specifications


    Maximum Tx power:
    +14dBm (Europe)
    +22dBm (America)
    +22dBm (Australia and New Zealand)
    Node range: Up to 50km
    Sigfox pre-certified (October 2016)
    Includes 12 months free subscription to the SIGFOX network. Following this we recommend taking out a subscription plan directly with Sigfox to suit your requirements. Please visit sigfox.com for more information.



    WLAN (WiFi) - Pycom


    Specifications

    AttributeValue
    RF TechnologyBluetooth Smart (BLE), SigFox, WiFi
    Kit ClassificationDevelopment Board
    Frequency2.4 GHz, 902 MHz, 921 MHz
    Kit NameSiPy IoT RCZ2/4
    83 In Global stock for delivery within 10 working day(s)
    Add to Basket
    units

    Added

    Price (ex. GST) Each

    $40.48

    (exc. GST)

    $44.53

    (inc. GST)

    unitsPer unit
    1 +$40.48