Countersinks

Countersink cutter drill bits are designed to fit directly into manual, electric and cordless drill driver attachments and have hexagonal or round shanks. Countersink cutters are used to create a chamfer around the rim of a pilot hole enabling the head of a countersunk screw to sit flush. Countersink cutters can also be used to remove the burr left from a drilling or tapping operation.


Types of Countersink Cutters



  • Cross-Hole Countersink Cutter: These have a hole that goes through the side of the cone that provides the cutting edge. These countersink cutters are suitable for deburring and can also be used in soft materials such as wood or plastic to create a countersunk hole. The design of these countersink cutters means that they are free from mechanical vibration or 'chatter' and they also stay in the centre.

  • Fluted Countersink cutter: These have fluted blades that produce a heavy chamfer to create the correct seating for a countersunk-head screw. Countersink cutters are available with six different cutting angles but the most common are 82° and 90°. The number of flutes on the countersink cutter can also vary.

  • Single fluted: These have less chatter or mechanical vibration than multi-fluted and are ideal for use in small holes for general-purpose countersinking, chamfering and deburring. These are designed for machine use and light portable work when operating at higher speeds.

  • Three fluted: These are designed for a chatter-free performance and are used mainly in portable applications at slower speeds. The design of these countersinks gives them a good centring ability.

  • Four fluted: These have good radial relief

  • Five Fluted: These have a rugged design and the odd number of flutes minimises chatter

  • Six fluted: These are ideal for producing fast shearing cuts


These countersink cutter drill bits are made from HSS (High-Speed Steel) which can withstand high temperatures without losing its hardness.


...
Read more Read less

Filters

Viewing 1 - 20 of 104 products
Results per page
Description Price Drill Bit Type Head Diameter Countersink Angle Number of Flutes Material Overall Length Number of Pieces Shank Diameter Shank Length
RS Stock No. 215-518
BrandRS PRO
$98.02
Each
units
Countersink Set 2 mm, 5 mm, 10 mm, 15 mm, 20 mm 90° - HSS - 4 - -
RS Stock No. 508-8982
Mfr. Part No.05649
BrandEXACT
$145.96
1 Set
Set(s)
Countersink Set 20.5mm 90° 3 HSS - 9 - -
RS Stock No. 218-567
BrandRS PRO
$108.71
Each
units
Countersink Set 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm 90° 3 HSS - 6 - -
RS Stock No. 812-6018
Mfr. Part No.G2361
BrandDormer
$254.50
Each
units
Countersink Set 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm 90° 3 HSS - 6 - -
RS Stock No. 508-8998
Mfr. Part No.05646
BrandEXACT
$24.11
Each
units
Countersink 20.5mm 90° 3 HSS 41 mm 1 1/4 in -
RS Stock No. 218-618
BrandRS PRO
$111.63
Each
units
Countersink Set 6 mm, 8 mm, 10 mm, 12 mm, 16 mm, 20 mm 90° 5 HSS - 6 - -
RS Stock No. 509-0008
Mfr. Part No.05522
BrandEXACT
$35.35
Each
units
Countersink 25mm 90° 3 HSS 67 mm 1 10 mm -
RS Stock No. 508-8976
Mfr. Part No.05421
BrandEXACT
$15.68
Each
units
Countersink 10mm 90° - HSS-E 45 mm 1 - -
RS Stock No. 508-9058
Mfr. Part No.05527
BrandEXACT
$120.65
1 Set
Set(s)
Countersink Set 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm 90° 3 HSS - 6 - -
RS Stock No. 218-573
BrandRS PRO
$37.31
Each
units
Countersink 20mm 90° 5 HSS - 1 - -
RS Stock No. 509-0014
Mfr. Part No.05513
BrandEXACT
$15.76
Each
units
Countersink 10.4mm 90° 3 HSS 50 mm 1 6 mm -
RS Stock No. 456-898
BrandRS PRO
$39.18
Each
units
Countersink 12mm - 3 HSS 120 mm 1 - -
RS Stock No. 508-9008
Mfr. Part No.05645
BrandEXACT
$19.89
Each
units
Countersink 16.5mm 90° 3 HSS 40 mm 1 1/4 in -
RS Stock No. 508-9020
Mfr. Part No.05643
BrandEXACT
$17.00
Each
units
Countersink 10.4mm 90° 3 HSS 34 mm 1 1/4 in -
RS Stock No. 218-668
BrandRS PRO
$28.44
Each
units
Countersink 10mm 90° 3 HSS - 1 - -
RS Stock No. 499-380
Mfr. Part No.4405727
BrandEXACT
$152.35
1 Set
Set(s)
Countersink Set 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm 90° 3 HSS-E - 6 - -
RS Stock No. 123-1853
Mfr. Part No.104650
BrandWera
$195.07
Each
units
Countersink Set 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm - 3 - - 8 - -
RS Stock No. 123-1857
Mfr. Part No.104655
BrandWera
$178.95
Each
units
Countersink Set 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm 90° - HSS - 8 - -
RS Stock No. 812-6012
Mfr. Part No.G2363
BrandDormer
$348.25
Each
units
Countersink Set 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm 90° 3 HSS - 6 - -
RS Stock No. 508-9193
Mfr. Part No.05424
BrandEXACT
$66.89
Each
units
Countersink 28mm 90° - HSS-E 84 mm 1 - -
Related Products
Three & Five-Flute HSS Countersinks 90° flutes for ...
Description:
Three & Five-Flute HSS Countersinks 90° flutes for use with machines and portable tools Three-flute designed to reduce clogging, improve clearance and be chatter free Three-flute for use on metals only Five-flute for use on metal and wood 90° flutes ...
90° countersink, triple-blade, HSS-E HSS-E countersink with cylinder ...
Description:
90° countersink, triple-blade, HSS-E HSS-E countersink with cylinder shaft For rust-free steels and + VA materials Three cutters with radial rear vent for vibration-free work For deburring, threading and weighting as per DIN 74 Standards DIN 335C HSS-E countersink with ...
Wera 846/8 3-Flute 8-Piece Countersink Bet Set From ...
Description:
Wera 846/8 3-Flute 8-Piece Countersink Bet Set From Wera this is the 846/8, 3-Flute, 8-piece countersink bit set complete with a 1 / 4-inch drive suitable for power screwdrivers. The countersink set includes a Kraftform bit holding screwdriver, Rapidaptor universal ...
Straight Shank Countersink with three cutters and large ...
Description:
Straight Shank Countersink with three cutters and large flutes are used for deep countersinking The shank is in C form and can be used with a variety of bit holders Deburring of pipes and drilled holes Ideal for use on ...