Compare list full


A screw extractor is a tool for removing broken, damaged, or seized screws. They can be driven manually using adjustable spanners or vice grip pliers or by using a hand-held power tool. You can learn more in our complete guide to screw extractors.

### Why use a Screw Extractor?

Screws can break, rust, or become stripped and need to be replaced. This brings any work or project to a halt. The easiest way to remove the screws before replacing with a new one, is to use a specialist tool such as a screw extractor. The screw extractors are similar to a screw but have a reverse thread.

### How to remove a screw using a screw extractor?

There are few steps that you will need to follow when you are using screw extractors. To make life easy for you, we thought of sharing those steps in detail.

- Always select a drill bit that is slightly smaller than the screw you want to remove.
- Attach to the drill
- Line the drill bit up with the centre of the screw
- Work slowly to drill a hole for the extractor
- Place the spiral end of the extractor into the hole you have drilled.
- Twist the extractor anti clockwise until you cannot turn it anymore
- Twist the extractor with a wrench or drill. Grip the top of the screw extractor with a wrench. Twist it anti clockwise until the screw comes free.
- If using a drill, attach the free end of the extractor to the drill, set to rotate in reverse and turn it on to turn the screw anti clockwise
- Remove the screw using pliers

### How to use a screw extractor?

Firmly fasten the extractor bit to a T-handle or hold it in your hands using locking pliers. Insert the extractor piece into damaged screw's pilot hole. Push the extractor solidly into pilot hole with a hammer. To remove the broken screw, spin the extractor counterclockwise while applying downward pressure.

Try pressing the extractor once more to obtain a better seat inside the pilot hole if it slides and loses the bite on the screw. As you rotate the extractor counterclockwise, press down harder. If it doesn't work, try again after slightly expanding the pilot hole.

You may still remove the screw without an extractor if one doesn't work. Before doing anything else, attempt to remove the screw by twisting it with pliers. If it doesn't work, carefully screw a smaller bit into old screw to entirely remove it. Remove the old metal fragments by drilling or slowly reversing the direction of the hole. Use a bigger screw and rethread the hole.

### What is an easy out tool?

Easy out tool is another name that is being used for screw extractors. As you can see, a screw extractor would be a highly useful tool that you can have around your house. It can deliver numerous benefits to you when you least expect them.

However, you will have many different types of screws and you will not know what type of a screw that you will have to get removed with the help of a screw extractor. This is where you may think about purchasing a screw extractor set. The set will provide all the assistance that you need to remove the screws, regardless of the nature and size of them.

When you have to deal with a broken screw, all you have to do is to use a screw remover. It can offer much-needed assistance to you with removing the screw. Just go ahead and buy the right easy out tool or the easy out set in our store.



When a screw gets stuck or broken, you can get the help of screw extractors. Find the best screw removers & extractor tool sets in our store!

Screw Extractors, Screw Removers & Easy Out Tool Sets | RS

Screw Extractors

If you are a DIYer or a craftsman, you should be equipped with an RS Screw Extractor. Visit our store and buy yours today!

RS PRO Screw Extractors | RS PRO Screw Extractor Sets | RS

Whether you are a craftsman or a DIYer, you will come across a frustrating situation when the screw gets broken or stripped. This will look like one of the most difficult problems to solve as well. As you continue to take out the screw, things will get even more difficult along with time. This is where you should think about using a screw extractor.What are RS Pro screw extractors? The RS Pro screw extractors are designed to provide a helping hand to you with removing broken or striped screws off from surfaces. This is a small tool to use, but it can be quite handy. You will be able to drive the screw extractor in counter clockwise direction, and you will be able to take out the screw easily.How does a screw extractor work? A typical screw extractor comes along with a square shaped head. On the other hand, you can discover a shaft at one end. There are reverse tapered threads on the other end, which you can use to cut into the screw. Due to the presence of the square shaped head, you will be able to easily grip it and take out the broken screw.Before using the screw extractor, you will need to drill a pilot hole. It should be smaller when compared to the screw extractor that you are using. Then you can make sure that your screw extractor can easily bite on it. After drilling the pilot hole, you can simply insert the extractor and then tap on its head along with a hammer. This will firmly fit the screw extractor onto the screw. Next, you will need to turn the wrench in counter clockwise direction, until you can take out the screw.Browse through our collection and buy the best screw extractor that can cater to your needs.

Looking for SAM screw extractor? All you have to do is to visit our store and go through different SAM screw extractor sets we offer exclusively for you.

SAM Screw Extractors | SAM Screw Extractor Sets | RS

If you are trying to take out a broken screw, you should be using a screw extractor. There are numerous screw extractor products available to consider out there in the market. Out of those products, SAM Screw Extractors are quite popular.What are SAM Screw Extractors? SAM Screw Extractors are some of the most functional and durable screw extractors that you can purchase from the market. The brand offers a variety of screw extractors. You may take a look at the available products and buy the best one that can cater to your needs.It is possible for you to use SAM Screw Extractors and extracts broken studs, machine screws, cap screws, and many other forms of threaded fasteners. Instead of trying to take the screw out on your own, you may go ahead and buy a SAM Screw Extractor at an affordable price and get the job done.How to use a SAM Screw Extractor? The process of using a SAM Screw Extractor is quite easy as well. All you have to do is to place the bit of the screw extractor on the drill. Then you can turn the drill in reverse direction, so that you can take out the stripped screw. This will only take a couple of minutes for you to get the job done. As a result, you can stay away from the hassle of trying to remove the broken screw on your own. You will love the functionality that SAM Screw Extractors offer.We offer the best SAM Screw Extractors for anyone in need. Browse through our selection and pick the best screw extractor that can help you with your needs.

RS PRO Screw Extractors

Popular Searches