Crimp Tool Positioners, Turrets & Locators

Crimp Tool Positioners are parts of a Crimping tool designed to adapt the tool frame to a particular application. Available in a wide selection of sizes and shapes locators guarantee versatility of every crimping tool. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates selector position. The positioners are easy to remove and replace when different connector size is required.


How easy crimping tools and positioners, turrets and locators are to use?


They are very easy to use, insert the contact pin into the hole of the crimp tool, load the wire into the contact pin, make sure it’s fully seated then and squeeze until the cycle finishes then finally check that you have a secure crimp.


How do you maintain the product?


There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.


The Importance of a High-Quality Crimp


When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the insulation crimp which provides strain relief against vibration and tension.The electrical connection must be gas-tight without any voids between the wire strands and the terminal. If there are any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.


...
Read more Read less

Filters

Viewing 81 - 100 of 101 products
Results per page
Description Price Type Series Number of Contacts Series Number
RS Stock No. 173-9637
Mfr. Part No.63819-0575
BrandMolex
$89.60
Each
units
Locator 207128 - 63819
RS Stock No. 173-9631
Mfr. Part No.63825-8175
BrandMolex
$98.77
Each
units
Locator 207128 - 63825
RS Stock No. 721-1428
Mfr. Part No.1208432
$63.37
Each
units
Assembly Tool SAC BIT M12-D15 - -
RS Stock No. 876-2034
Mfr. Part No.1579005-1
$21.68
Each
units
Spring ERGOCRIMP - -
RS Stock No. 876-2080
Mfr. Part No.4-539785-7
$96.03
Each
units
Locator Mini CERTI-LOK - -
RS Stock No. 174-3163
Mfr. Part No.690716-3
$283.48
Each
units
Wire Crimper - - -
RS Stock No. 174-3154
Mfr. Part No.462006-6
$198.35
Each
units
Floating Shear - - -
RS Stock No. 173-9639
Mfr. Part No.63819-1575
BrandMolex
$89.60
Each
units
Locator 207128 - 63819
RS Stock No. 173-9643
Mfr. Part No.63819-4375
BrandMolex
$89.60
Each
units
Locator 207128 - 63819
RS Stock No. 174-3161
Mfr. Part No.453819-3
$247.75
Each
units
Wire Crimper - - -
RS Stock No. 175-6026
Mfr. Part No.JBX1OUTLP13
BrandSouriau
$726.33
Each
units
Locator JBX - -
RS Stock No. 173-9633
Mfr. Part No.63827-1575
BrandMolex
$81.49
Each
units
Locator 207128 - 63827
RS Stock No. 175-6299
Mfr. Part No.TMC-PD
BrandProvertha
$747.39
Each
units
Positioner TMC 5 -
RS Stock No. 173-9638
Mfr. Part No.63819-1375
BrandMolex
$81.49
Each
units
Locator 207128 - 63819
RS Stock No. 760-0196
Mfr. Part No.DCE.91.090.5MVC
BrandLemo
$206.61
Each
units
Positioner M - -
RS Stock No. 175-6025
Mfr. Part No.JBX1OUTLP09
BrandSouriau
$726.33
Each
units
Locator JBX - -
RS Stock No. 721-1434
Mfr. Part No.1208461
$79.73
Each
units
Assembly Tool SAC BIT M8-D10 - -
RS Stock No. 876-2359
Mfr. Part No.525441-4
$598.25
Each
units
Plug Gauge - - -
RS Stock No. 173-9632
Mfr. Part No.63827-1475
BrandMolex
$81.49
Each
units
Locator 207128 - 63827
RS Stock No. 173-9635
Mfr. Part No.63819-1075
BrandMolex
$89.60
Each
units
Locator 207128 - 63819
Related Products
Han-Com®, Han D®, Han DD® and Han® E ...
Description:
Han-Com®, Han D®, Han DD® and Han® E Crimp Contacts A range of high quality turned crimp contacts for Han-Com®, Han D®, Han DD® and Han® E inserts The appropriate parallel action crimp to tool is also available for optimum ...
Place the tool into the cavity from front ...
Description:
Place the tool into the cavity from front face of the insulator Push on the handle Remove the contact by pulling on it
Tooling Support crimp tools and positioners (not illustrated), ...
Description:
Tooling Support crimp tools and positioners (not illustrated), are available and can be selected from the table according to contact current rating The 400 series provides a compact secure connection where a high level of environmental sealing is required. For ...
Accessories Stainless steel Compatible with MIL-STD 83513 interfaces ...
Description:
Accessories Stainless steel Compatible with MIL-STD 83513 interfaces Note Crimp tool manufactured by Glenair Lightweight design and very high density, micro Comp® is an alternative to HD DSUB with superior characteristics,A flexible alternative to MIL-STD 83513 connectors. Stainless steel Compatible ...