Indicator Lampholders & Bulb Holders | RS
Recently searched

    Indicator Lampholders

    Indicator lampholders are support indicator lights within a lighting fixture and link them to the electrical circuit. These holders or sockets hold the bulbs and enable electrical contact to provide the bulbs with power to switch on, switch off or flash at pre-determined intervals. They also allow the lights to be easily removed, switched out or replaced.

    What are indicator lampholders used for?

    Indicator lampholders are most commonly found within the automotive industry, where they are used to secure the bulbs of brake lights, turning signal lights, warning gauge lights and ignition status lights.

    In the industrial and manufacturing sectors, indicator lampholders are used with equipment or machinery status indicator or warning lights. They are an integral part of the safety and emergency measures within plants and factories.

    Types of indicator lampholders

    Indicator lampholders are categorised in terms of their different attributes, including:

    • Mounting types, such as PCB (printed circuit board) or panel mount.
    • Termination types, such as soldered, wire lead or screwed.
    • Base formats, such as bayonet, screw in, candelabra or wedged.

    26 Products showing for Indicator Lampholders

    -
    -
    BA9
    -
    10.3mm
    20mm
    -
    -
    -
    $2.126
    Each (In a Pack of 5)
    -
    LED
    BA9s, E10
    -
    10mm
    42mm
    -
    -
    -
    $2.066
    Each (In a Pack of 5)
    PCB Mount
    -
    Wedge
    -
    -
    12mm
    -
    -
    -
    $1.946
    Each (In a Pack of 5)
    PCB Mount
    -
    Wedge
    -
    10mm
    14.5mm
    -
    -
    -
    $0.424
    Each (In a Pack of 5)
    -
    LED
    -
    -
    11mm
    21mm
    -
    -
    -
    $0.61
    Each (In a Pack of 5)
    PCB Mount
    -
    Wedge
    -
    5mm
    14mm
    T1
    -
    1.5mm
    EAO
    -
    LED
    -
    Solder Tab
    -
    -
    -
    22.3mm
    -
    Arcolectric (Bulgin) Ltd
    Panel Mount
    -
    -
    -
    14.7mm
    -
    -
    12.7mm
    9.6mm
    Arcolectric (Bulgin) Ltd
    Panel Mount
    -
    -
    -
    14.7mm
    -
    -
    12.7mm
    9.6mm
    Arcolectric (Bulgin) Ltd
    Panel Mount
    -
    -
    -
    14.7mm
    -
    -
    12.7mm
    9.6mm
    Sloan
    Panel Mount
    LED
    Wedge
    -
    11.2mm
    -
    -
    -
    -
    EAO
    -
    LED
    Solder Tabs
    Solder Tab
    -
    -
    -
    18mm
    -
    Orbitec
    PCB Mount
    -
    BA9s
    Solder Tab
    10mm
    28mm
    -
    2 x 0.7mm
    8mm
    Banner
    -
    LED
    -
    -
    -
    -
    -
    -
    -
    Arcolectric (Bulgin) Ltd
    Panel Mount
    -
    -
    -
    14.7mm
    -
    -
    12.7mm
    9.6mm
    Arcolectric (Bulgin) Ltd
    Panel Mount
    -
    -
    -
    14.7mm
    -
    -
    12.7mm
    9.6mm
    Banner
    -
    LED
    -
    -
    -
    150mm
    -
    -
    -
    EAO
    -
    LED
    Solder Tabs
    Solder Tab
    -
    -
    -
    16mm
    -
    Dialight
    -
    -
    -
    -
    -
    -
    -
    -
    -
    JKL Components
    PCB Mount
    LED
    Wedge
    Solder Tab
    20mm
    16.5mm
    -
    16mm
    1.6mm
    Results per page