IEC Connectors

IEC Connectors are used as power couplers for electrical appliances. IEC refers to the set of standards from the International Electrotechnical Commission, ensuring that the power cords for appliances conform to a standardized set of safety requirements for appliances not exceeding a 250 V ac voltage or 16 A rated current.
For everything to domestic kitchen equipment to computer hardware in office environments, the IEC connector is available in different sizes and shapes to accommodate the current, temperature and earthing requirements of different appliances.


IEC Types:



  • C1/C2- Used for small electrical appliances such as electric trimmers or shavers.

  • C5/C6- Known as a cloverleaf, this power connector is used in smaller electrical appliances such as projectors.

  • C7/C8- The figure-eight connector is commonly used in personal stereo systems and some older laptop models.

  • C13/C14- This connector is used for larger electrical appliances, such as kitchen appliances, instrumentation amplifiers and computer hard drives.

  • C15/C16- This connector is often referred to as a kettle lead due to its use in powering electric kettles. They are well suited to this task due to their designation as a ’hot condition’ coupler and having a high-temperature rating

  • C15A/C16A- Is similar to the C15 and C16, but is rated for a higher temperature.

  • C17/C18- Is an unearthed power connector that is used in audio applications when audio quality is a concern.

  • C19/C20- Is a power connector for high current applications, such as uninterruptible power supplies or power distribution units.


...
Read more Read less

Filters

Viewing 1 - 20 of 324 products
Results per page
Description Price IEC Connector Type Mounting Type Gender Current Rating Body Orientation Termination Method Switch Type Number of Fuses Voltage Rating Rewireable Fuse Size Maximum Cable Diameter Shuttered Series
RS Stock No. 488-191
BrandRS PRO
$7.15
Each
units
C14 Panel Mount Male 10.0A Straight Solder, Spade None - 250 V ac - - - - -
RS Stock No. 776-9135
BrandRS PRO
$1.79
Each
units
C20 Panel Mount Male 20.0A Straight Solder/Faston None None 250 V ac - - - - -
RS Stock No. 811-7207
BrandRS PRO
$1.63
Each
units
C14 Panel Mount Male 10.0 A, 15.0A Straight Solder None None 250.0 V - - - - -
RS Stock No. 811-7193
BrandRS PRO
$3.51
Each
units
C13 Panel Mount Female 10.0 A, 15.0A Straight Solder/Faston None None 250.0 V - - - - -
RS Stock No. 776-9144
BrandRS PRO
$2.42
Each
units
C19 Panel Mount Female 20.0A Straight Solder/Faston None None 250 V ac - - - - -
RS Stock No. 811-7222
BrandRS PRO
$3.94
Each
units
C14 Snap-In Male 6.0A Straight Solder/Faston 2 Pole 1 250.0 V - 5 x 20mm - - -
RS Stock No. 811-7204
BrandRS PRO
$3.35
Each
units
C14 Snap-In Male 10.0A Straight Solder/Faston None 1 250.0 V - 5 x 20mm - - -
RS Stock No. 776-9138
BrandRS PRO
$3.17
Each
units
C13 Snap-In Female 15.0A Straight Solder/Faston None None 250 V ac - - - - -
RS Stock No. 811-7213
BrandRS PRO
$4.39
Each
units
C14 Panel Mount Male 10.0A Straight Solder/Faston None 1 250.0 V - 5 x 20mm - - -
RS Stock No. 811-7197
BrandRS PRO
$5.98
Each
units
C13 Snap-In Female 10.0 A, 20.0A Straight Solder/Faston None None 250.0 V - - - - -
RS Stock No. 811-7229
BrandRS PRO
$3.94
Each
units
C14 Snap-In Male 6.0A Straight Solder/Faston 2 Pole 1 250.0 V - 5 x 20mm - - -
RS Stock No. 811-7238
BrandRS PRO
$4.26
Each
units
C20 Snap-In Male 16.0 A, 20.0A Straight Solder/Faston None None 250.0 V - - - - -
RS Stock No. 811-7210
BrandRS PRO
$5.42
Each
units
C14 Snap-In Male 6.0A Straight Solder/Faston 2 Pole 1 250.0 V - 5 x 20mm - - -
RS Stock No. 811-7235
BrandRS PRO
$4.59
Each
units
C14 Panel Mount Male 10.0A Straight Solder/Faston None 2 250.0 V - 5 x 20mm - - -
RS Stock No. 811-7226
BrandRS PRO
$3.94
Each
units
C14 Snap-In Male 6.0A Straight Solder/Faston 2 Pole 1 250.0 V - 5 x 20mm - - -
RS Stock No. 811-7216
BrandRS PRO
$5.33
Each
units
C14 Snap-In Male 6.0A Straight Solder/Faston 2 Pole 1 250.0 V - 5 x 20mm - - -
RS Stock No. 811-7200
BrandRS PRO
$1.68
Each
units
C14 Snap-In Male 10.0 A, 15.0A Right Angle Solder None None 250.0 V - - - - -
RS Stock No. 776-9131
BrandRS PRO
$2.13
Each
units
C14 Snap-In Male 10.0 A, 15.0A Straight Solder None None 250 V ac - - - - -
New
RS Stock No. 203-5562
BrandRS PRO
$2.07
Each (In a Bag of 5)
units
C14 Panel Mount Male 10A Straight Snap-In - - 250 V - - - - -
RS Stock No. 896-2136
BrandRS PRO
$1.786
Each (In a Pack of 5)
units
- Snap-In Male 20.0A Straight Faston - - 250.0 V - - - - -
Related Products
Schurter IEC Accessories Professional of Schurter IEC accessories ...
Description:
Schurter IEC Accessories Professional of Schurter IEC accessories Accessories include the cord retaining strain relief which is primarily designed to protect any accidental disconnections from the plug and fuse-holders for use with the 6200 series of power entry modules. Screw ...
4710 Series Professional range of Schurter power entry ...
Description:
4710 Series Professional range of Schurter power entry modules from the 4710 series, with a convenient IDC connection system The modules are designed to be used on appliances with protection class I acc. to IEC 61140 Panel Mount Straight Blade ...
Appliance Inlet C8, Solder, PCB or Quick-connect Terminal ...
Description:
Appliance Inlet C8, Solder, PCB or Quick-connect Terminal Panel Mount: Split panel (sandwich) or snap-in version from front side Appliance Inlet, Pin temperature 70 °CISolder, Quick Connect or PCB Terminal.
10A Snap-In Single Pole Switched IEC 320 Plug ...
Description:
10A Snap-In Single Pole Switched IEC 320 Plug (C14) With or without neon Conformity to BS4491Type 250 terminations Panel cut out: 48·4 x 34·4 Approvals UL recognised component, CSA certified, BSI, IMQ, SEMKO, VDE With or without neon Conformity to ...