brands

attributes.Output_Type

attributes.Body_Style

attributes.Mounting_Style

attributes.Supply_Voltage

attributes.Terminal_Type

attributes.Maximum_AC_Voltage

attributes.Maximum_DC_Voltage

attributes.Detection_Range

attributes.Switching_Current

attributes.Switching_Frequency

attributes.Length

attributes.Width

attributes.Depth

attributes.Dimensions

attributes.IP_Rating

attributes.Maximum_Operating_Temperature

Honeywell Hall Effect Sensor, Ratiometric Output, 4.5 → 10.5 V dc

Honeywell Hall Effect Sensor, Digital Output, -1 → +25 V dc, 25V


A hall effect sensor is a transducer that varies its output voltage in response to a magnetic field. Based on the fundamental hall effect principle, these non-contact sensing devices are used for detecting the presence of a magnetic field, measuring its strength, or sensing parameters like position, speed, and current without physical contact. 

Their robust nature, immunity to dust and dirt, and solid-state reliability make them indispensable in numerous industrial, automotive, and consumer electronic applications. From simple proximity detection to complex current measurement, a hall sensor provides accurate and durable sensing solutions in diverse operating environments.

## **How Do Hall Effect Sensors Work?**

A hall sensor works by exploiting the hall effect: when current flows through a semiconductor in the presence of a perpendicular magnetic field, a voltage (hall voltage) is generated. This voltage is proportional to the magnetic field strength and the current.

In practical terms, the hall element is combined with amplifier and output circuitry to produce either:

- A continuous analogue signal (analogue hall effect sensor), or
- A binary on/off signal (digital hall sensor).

This contactless operation enables long-lasting, maintenance-free sensing in harsh industrial environments.

## **Industrial Applications of Hall Effect Sensors**

Hall effect sensors are incredibly adaptable and essential in numerous applications. Their non-contact nature, dependability, and capacity to function in challenging conditions make them vital in many systems.

- **Proximity Sensing and Position Detection:** Detecting presence/absence of components or doors.
- **Speed and RPM Measurement:** Monitoring gear or motor rotation.
- **Current Sensing:** A hall effect current sensor measures AC/DC current with galvanic isolation.
- **Flow Rate Measurement:** Measuring fluid flow via impeller rotation.
- **Linear Position Sensing:** Measures a magnet's position on a moving component and outputs a corresponding voltage for accurate linear motion tracking
- **Motor Commutation:** Used in BLDC motors to determine rotor position.
- **Robotics and Automation:** Integrated into robotic systems for precision feedback.

## **Types of Hall Effect Sensors**

Hall effect sensors come in various configurations, primarily distinguished by their output type and internal circuitry, catering to a diverse range of applications.

- **Analog Hall Effect Sensor:** Delivers a continuous voltage proportional to magnetic field strength—ideal for current sensing or linear position detection.
- **Digital Hall Sensor:** Provides an ON/OFF output when a magnetic field passes a threshold. Available in unipolar, bipolar, and omnipolar versions for various switching needs.
- **NPN Hall Effect Sensor:** Features a sinking output (to ground), commonly used with PLCs and microcontrollers in industrial systems.
- **Hall Effect Current Sensor:** Measures AC or DC current without contact, offering electrical isolation—suitable for power supplies and motor drives.
- **4 Wire Hall Effect Sensor:** Adds features like diagnostics or dual outputs for advanced control requirements beyond standard 3-wire configurations.
- **Hall Effect IC:** Integrates sensing, signal processing, and logic into a single compact chip for easy circuit integration.

## **Hall Effect Sensors Installation**

Proper installation of a hall effect sensor is crucial for accurate and reliable performance, as its operation is highly dependent on its interaction with a magnetic field.

1. Power off the system before installation.
2. Mount properly, aligning the sensor to the magnetic field—perpendicular for optimal detection.
3. Position correctly:
    - For proximity or speed sensing, keep proper distance from the magnet or gear teeth.
    - For current sensing, ensure the conductor is correctly placed through or beside the sensing area.
4. Wire accurately:
    - 3-wire: VCC, GND, Output
    - 4-wire: May include inverted output or diagnostics
    - Match NPN hall effect sensor output to correct load setup.
5. Test after install to confirm signal response to the magnetic target.

Following these guidelines will help ensure your hall sensor performs optimally and reliably in its intended application.

## **Choosing the Right Hall Sensor**

Selecting the appropriate hall effect sensor requires careful consideration of the application's specific needs and environmental factors.

1. **Analog vs Digital:** Use analogue for continuous output (position, current); digital for on/off detection (proximity, speed).
2. **Sensitivity:** Ensure the sensor matches the expected magnetic field range.
3. **Current Measurement:** Choose open-loop or closed-loop hall effect current sensors based on accuracy needs.
4. **Output Configuration:** Match NPN, PNP, or push-pull to your system input.
5. **Temperature Range:** Confirm suitability for the environment, especially for industrial hall effect sensors.
6. **Power Supply:** Match the sensor’s voltage range to your system.
7. **Form Factor:** Pick a suitable package—e.g., through-hole, SMD, or flange mount.
8. **Wiring:** Most are 3-wire; use a 4 wire hall effect sensor for diagnostics or extra functions.
9. **Brand and Budget:** Prioritise reliable suppliers. Only buy hall effect sensor models from trusted sources.

By carefully evaluating these parameters, you can select the most suitable hall sensor to achieve reliable and accurate performance in your application.

## **Buy The Best Hall Effect Sensors from RS Australia**

RS Australia is proud to offer a comprehensive selection of high-quality hall effect sensors from some of the most reputable brands in the industry. Our range ensures you have access to reliable components for all your industrial, automotive, and electronic design applications. Top brands available include [RS PRO](https://au.rs-online.com/web/b/rs-pro/), [Variohm Group](https://au.rs-online.com/web/b/variohm-group/) and [Honeywell](https://au.rs-online.com/web/b/honeywell/).

Browse our online catalogue to discover essential tools beyond hall effect devices like [fibre optic sensors](https://au.rs-online.com/web/c/automation-control-gear/sensors/fibre-optic-sensors/), [thermocouples](https://au.rs-online.com/web/c/automation-control-gear/sensors/thermocouples/), and [yellow fork terminals](https://au.rs-online.com/web/c/connectors/wire-terminals-splices/fork-terminals/). Enjoy convenient online procurement with fast, nationwide doorstep delivery, including next-working-day delivery across Australia. Visit our [delivery page](https://au.rs-online.com/web/content/support/all-articles/delivery)for more information.



Hall Effect Sensors

Sensors

Automation & Control Gear

1228569899

1370019343

1492797549

1805640584

1950438482

2911534392

2972144945

3047907070

3089561311

3379516231

3577158573

3702440375

3893962904

3999174723

4084450865

4292484756

595160564

607105215

630592386

1953764780

2854130884

3031041232

3606191116

3694170890

4239710393

Development Tools & Single Board Computers

Raspberry Pi, Arduino, ROCK, STEM Education & Development Tools

Electronic Components, Power & Connectors

Engineering Materials & Industrial Hardware

Pneumatic Counters, Logic Controllers & Timers

Electronics Cleaners & Protective Coatings

LEM AHR Series ASIC Open Loop Hall Effect Current Transducer 4 → 20 mA Output, 20 → 50 V

MikroElektronika Hall Current 22 Click Power Supply for Hall Effect Current Sensor for mikroBUS

Honeywell Through Hole Hall Effect Sensor 3.8 → 30 V dc, 30V

Infineon Through Hole Hall Effect Sensor 32 V

Allegro Microsystems ACS712ELCTR-20A-T SOIC

Honeywell Hall Effect Sensors

22 Products showing for Honeywell Hall Effect Sensors

Popular Searches

Related links