Schneider Electric Spacial SBM Series Steel Wall Box, IP66, 200 mm x 400 mm x 120mm

The Spacial SBM steel enclosures from Schneider Electric are available in three versions and are designed for use in industrial machine and building applications.
The wall mounting enclosures have a single piece rectangular body with folded gutters in the front and 2 (or 3*) drilled profiles for installing mounting plates and DIN rails in the rear, fixing centres of 12.5 mm.
The enclosure cover is equipped with a polyurethane sealing gasket and 2, 3, 4 or 6 half-turn threaded screws, depending on the version (**). An M6 x 16 earth stud is welded in the cover to provide equipotential connection with the body.

• 28 sizes available increasing to 42 by using the extension box accessory
• 80mm and 120mm depths available, with or without pre-built FL 21 cable entries
• IP66 protection meaning the enclosures are dust tight and protect against powerful jets of water and heavy seas
• External mechanical impact resistance of up to IK10 (joules 20) meaning the wall box gives protection against a 5 kg object dropped from 40 cm in height
• Can be Installed with just a screwdriver
• Direct fixing though the rear or with external mounting lugs
• Protected inside and outside with polyester grey paint, RAL 7035
• Attractive and tough design for protection of sensitive electronics

The Spacial SDB range from Schneider are suitable for use in underground parking, road and railway tunnels.

(*) 3 profiles for width 800 mm, (**) 2 for Bus box (3 screws for width greater than 400 mm), 4 for Flat and Entry boxes (6 screws for width greater than 400 mm).

Keep your electrical equipment under wraps with this wall box from Schneider Electric. It's a lockable, multi-purpose enclosure that you can easily install on a wall using just a screwdriver. As it withstands up to 20 joules of force and protects the contents from a 5kg object being dropped on it from a 40cm height, this is a tough nut to crack. An IP66 rating means you can rest assured it provides complete protection against high-pressure water jets and dust, so it's an ideal solution for environments that need regular washdowns.

• Dimensions of 200 (H) x 400 (W) x 120mm (D) provide plenty of space
• Screw cover can be removed when needed for easy maintenance
• Broad operating temperature range between -35°C and +80°C, for use in extreme environments

• Manufacturing plants
• Domestic power equipment
• Industrial automation

NSYSBM204012 has external dimensions of 200 x 400 x 120 mm.

The NSYSBM204012 enclosure is supplied with a steel body, 1 cover with a half turn metal screw and 4 cover screws.

The NSYSBM204012 has an Ingress Protection rating of IP66 so can be used inside or outside.

The enclosure has an outside sealed area: PZ2 screwdriver captive screw

IEC 62208 which is the reference standard regarding empty enclosures for device assemblies for protection and manoeuvre to low voltage.