STMicroelectronics STM1061N34WX6F, Voltage Detector 3.468V max. 3-Pin, SOT-23

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

Voltage Detector, STMicroelectronics

Voltage Detector ICs provide basic voltage monitoring and reset timing for power-on resets.
The STM1061 low power voltage detector monitors the supply input. When the power supply falls below a specified trip point threshold, the output is forced low and remains asserted as long as the VCC input remains below the threshold voltage plus the hysteresis.

Microprocessor Supply Voltage Supervisory & Reset Circuits

Power supply voltage monitoring and supervisory circuits for use in desktop, laptop and notebook computers, test and measurement instruments, portable battery-powered equipment and multiple-output power supplies.

Supply Voltage Detector
Supply Voltage Supervisor
Power Supply Supervisor
Microprocessor Supervisory
Microprocessor Voltage Supervisor
Microcontroller Reset Circuit

Attribute Value
Voltage Supervisor Type Low Power Voltage Detector
Number of Supervisors 1
Maximum Reset Threshold Voltage 3.468V
Minimum Reset Threshold Voltage 3.332V
Mounting Type Surface Mount
Package Type SOT-23
Pin Count 3
Dimensions 3.04 x 1.4 x 1.02mm
Height 1.02mm
Length 3.04mm
Maximum Operating Supply Voltage 6 V
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Minimum Operating Supply Voltage 0.7 V
Width 1.4mm
On back order for despatch 11/09/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each (On a Reel of 3000)
$ 0.274
(exc. GST)
$ 0.301
(inc. GST)
Per unit
Per Reel*
3000 +
*price indicative
Related Products
The LDLN025 is a 250 mA low-dropout voltage ...
The LDLN025 is a 250 mA low-dropout voltage regulator, able to work with an input voltage range from 15 V to 5.5 V. The typical dropout voltage at 250 mA load is 120 mV. The very low quiescent current, which ...
BDxxHC5MEFJ-M is a LDO regulator with output current ...
BDxxHC5MEFJ-M is a LDO regulator with output current 15A. The output accuracy is ±1% of output voltage. With external resistance, it is available to set the output voltage at random (from 1.5V to 7.0V).It has package type: HTSOP-J8. Overcurrent protection ...
BD33IC0MEFJ-C is a LDO regulator with output current ...
BD33IC0MEFJ-C is a LDO regulator with output current 10 A. The output accuracy is ±3% between Ta = -40 °C to +125 °C. It has package type: HTSOP-J8 which is small and good heat resistance. Over current protection (for protecting ...
The STSPIN240 is a dual brush DC motor driver integrating a low RDS(ON) power stage in a small QFN 3 x 3 mm packageBoth the full-bridges implement an independent PWM current controller with fixed OFF time.The device is designed to ...