RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.
 
MPN

Monitran Vibration Sensor 20 mA -25°C → +90°C, Dimensions 27 x 43 mm


On back order for despatch 11/03/2021, delivery within 7 working days from despatch date.
Add to Basket

Price (ex. GST) Each

$417.87

(exc. GST)

$459.66

(inc. GST)

units

Added

RS Stock No.:
533-2368
Mfr. Part No.:
MTN/1185CQ-10
Manufacturer:
Monitran

RoHS Status: Not Applicable

COO (Country of Origin):
GB
unitsPer unit
1 - 5$417.87
6 +$409.40

MTN1185 Series 4-20mA Accelerometer


Used for air handling units, building services, fans
4-20mA output for PLC interface
Output proportional to RMS velocity (mm/s)
Available with 0-10mm/s (533-2368) or 0-25mm/s (533-2374) velocity ranges
Frequency from 2 Hz to 1 kHz
Dynamic range: 50 g peak
5 meter armoured PTFE cable
IP 67 Stainless Steel body Case
To use with Glue or M8 Mounting stud
Dimensions (DxL): 27 x 43 mm


Approvals

EEx ia lic BAS02ATEX1057/3

Accelerometers

Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.

AttributeValue
Maximum Current20 mA
Length27mm
Width27mm
Minimum Operating Temperature-25°C
Maximum Operating Temperature+90°C
Dimensions27 x 43 mm