The Jumo di eco series digital indicator has a supply voltage rating of 230VAC. This indicator has a length of 76mm and width of 36mm. It has Fe-Con J wire input circuit. This factory-set version is easily configurable for measurement within the supported range. The digital indicator is used for the simple visualization of temperatures or standard signals. The measurement input permits the connection to resistance thermocouples, or standard current or voltage signals. It monitors for limits infringements using a 10A relay (changeover contact) and indicates them by use of an LED. The electrical connection is established via screw terminals on the back of the instrument.
Features and Benefits
3-digit indicator with red backlighting 1 C/O relay output in case of set point being exceeded Adjustable switching hysteresis Programmable switch-on delay after power-on Configurable alarm suppression Symbols in display for temperature unit, minutes and seconds Parameter level protected by code Setup program for configuration and archiving via PC Customized linearization via tabular function in the setup program
Certifications
IP65 rated (front) IP20 rated (rear ) EN 61 326 EN 61 010 Overvoltage category III Pollution degree 2