Eaton 32A British Standard Fuse, A2, 550V ac, 73mm

Cooper Bussman's bolted tag fuse is essentially a fuse that is fitted with brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Cooper Bussman's fuses are commonly found within a multitude of industrial applications, electrical equipment and wiring systems.

• The low-temperature rise enables the fuse to be suitable for high-density mounting applications
• Fuse links, specifically designed for the protection of applications
• Conforms to industry standards
• Low voltage fuse
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS88

A slotted tag fuse is distinguished by the metal slotted tags that extend off the ends of the fuse. This tag can either enable the fuse to have an offset tag or be centred to the fuse. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure within electrical circuits.

• Features a 32 A current rating
• Holds a 550 V ac voltage rating
• Sits within the GG application category
• Dimensions are: L85mm x D13.7 mm x H35.5mm
• A2 fuse size

• Overall length of 85mm to fit into compact circuit designs
• Bolted offset tags for easy attachment to fuse holders
• Designed for type-2 coordinated applications to save downtime and improve safety
• Low resistance for higher sensitivity to current and voltage changes

No, once an irregularity in voltage or current flow causes a fuse element to break, the whole fuse needs to be replaced immediately to keep your equipment safe to use and protected from damage.

Eaton formerly known as Bussmann