- RS Stock No.:
- 139-984
- Mfr. Part No.:
- ED250
- Brand:
- Eaton
On back order for despatch 13/05/2024, delivery within 10 working days from despatch date.
Added
Price (ex. GST) Each
$138.63
(exc. GST)
$152.49
(inc. GST)
Units | Per unit |
1 - 24 | $138.63 |
25 - 99 | $135.16 |
100 + | $131.61 |
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 139-984
- Mfr. Part No.:
- ED250
- Brand:
- Eaton
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details
Cooper Bussman Bolted Tag Fuse - British Standard
Cooper Bussman's bolted tag fuse is essentially a fuse that is fitted with brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Cooper Bussman's fuses are commonly found within a multitude of industrial applications, electrical equipment and wiring systems.
Features & Benefits
• The low-temperature rise enables the fuse to be suitable for high-density mounting applications
• Fuse links, specifically designed for the protection of applications
• Conforms to industry standards
• Low voltage fuse
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS88
• Fuse links, specifically designed for the protection of applications
• Conforms to industry standards
• Low voltage fuse
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS88
Why use a slotted tag fuse?
A slotted tag fuse is distinguished by the metal slotted tags that extend off the ends of the fuse. This tag can either enable the fuse to have an offset tag or be centred to the fuse. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure within electrical circuits.
Eaton British Standard Fuse, B3, 250A ED250
This general-purpose offset tag fuse from the Eaton range will protect your equipment from electrical short circuits and overcurrent. It's a standard cylindrical fuse equipped with two offset brackets on both ends. These bolted tags are used to link it to a fuse holder, which ensures secure insulation.
For improved electrical safety, this fuse is designed to break the flow of current in the event of a fault. With a high breaking capacity of 80kA, it's ideal for use in heavy-duty equipment and machinery. Its function as a weak link in the circuit makes it an essential part of industrial and electrical setups.
For improved electrical safety, this fuse is designed to break the flow of current in the event of a fault. With a high breaking capacity of 80kA, it's ideal for use in heavy-duty equipment and machinery. Its function as a weak link in the circuit makes it an essential part of industrial and electrical setups.
Features & Benefits
High rupture capacity for consistent performance and improved lifespan
Low temperature rise makes it suitable for high-density mounting in busy systems
Low melting point and reduced fuse element to control arcing and improve electrical safety
Low temperature rise makes it suitable for high-density mounting in busy systems
Low melting point and reduced fuse element to control arcing and improve electrical safety
Do I need to carry out any maintenance on this component?
While it doesn't need any regular maintenance, this fuse is designed to break in the event of a short circuit so it will need to be replaced if that happens.
Note
Eaton formerly known as Bussmann
Specifications
Attribute | Value |
---|---|
Current Rating | 250A |
Fuse Size | B3 |
Voltage Rating | 415V ac |
Fuse Standard | BS 88, IEC 269 |
Fixing Centres | 111mm |
Application Category | gG |
Tag Width | 19mm |
High Rupture Capacity | Yes |
Overall Length | 136mm |
Body Diameter | 31mm |
Tag Type | Bolted |
Body Length | 47mm |
Tag Orientation | Centred |
Body Height | 55mm |
Fuse Dimensions | 31 x 47mm |
Series | Bussmann |
Related links
- Connector Wrenches
- Clamps
- RS PRO Zinc Alloy 5-way Control Cabinet Key
- Single Parameter(s) Chlorine Test Strips, max. measurement 200ppm...
- Draw Wires & Fish Tapes
- PCL, Thread Size 1 → 26 mm Tyre Depth Gauge
- RS PRO 250A British Standard Fuse 415V ac, 111mm
- Eaton 250A British Standard Fuse 690 V ac 80 → 85mm