3 Output 15 → 30W Flyback SMPS Transformer, 85 → 265V ac, 3.3 → 7 V ac, 8 → 17 V ac

  • RS Stock No. 418-5543
  • Mfr. Part No. 74030
  • Manufacturer Myrra
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

Switch mode power supply transformers format E25 & ETD, 15 W switch mode

From Myrra the E25 and ETD Series flyback transformers form the core of a switch mode power supply in association with a specialised circuit (VIPer, TOPSwitch, CoolSet, or control circuit + Mosfet.) Constructed with reinforced insulation, the E25 and ETD Series of flyback transformers exclusively use UL94-V0 listed materials.

Features and Benefits:
• Primary / Secondary Insulation ≥ 4000V
• Primary / Auxiliary Insulation ≥ 1500V
• Creepage distance Primary / Secondary ≥ 8mm
• Secondaries can be connected in series or in parallel.
• Materials comply with UL94-V0

Standards

IEC 950, IEC 61558 for reinforced insulation

Open Frame - Laminated

PCB mounting mains transformers with a single 230Va.c. or twin 115Va.c. 50/60Hz primary winding. Independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options.

Double section metric bobbin constructionFull varnish impregnation

Specifications
Attribute Value
Secondary Voltage Rating 3.3 → 7 V ac, 8 → 17 V ac
Primary Voltage Rating 85 → 265V ac
Power Rating 15 → 30W
Number of Outputs 3
Mounting Type Through Hole
Application Flyback
Secondary Current 1.5 A, 3 A
Termination Type Pin
Length 26.5mm
Width 22.5mm
Depth 26.5mm
Dimensions 26.5 x 22.5 x 26.5 mmmm
Number of Phases 1
Construction CEI335, CEI61558, CEI950
Maximum Operating Frequency 100kHz
Stock check temporarily unavailable - call for stock availability
Price (ex. GST) Each
$ 13.61
(exc. GST)
$ 14.97
(inc. GST)
units
Per unit
1 - 24
$13.61
25 - 49
$13.25
50 - 99
$12.91
100 - 249
$12.61
250 +
$12.40
Related Products
Description:
Type UI 30 - 3 VA → 10 VA Secondary voltages are nominal load voltages on resistive loadsOnly the pins indicated on the wiring diagram "physically" exist. Standards IEC 742, VDE 0551, SEV 1003 Approvals UL 506. Secondary voltages are ...
Description:
Type UI 48 - 40 VA → 60 VA Secondary voltages are nominal load voltages on resistive loadsOnly the pins indicated on the wiring diagram "physically" exist. Standards IEC 742, VDE 0551, SEV 1003 Approvals UL 506. Secondary voltages are ...
MID-PPTI Push-Pull Transformers for Texas Instruments Small size ...
Description:
MID-PPTI Push-Pull Transformers for Texas Instruments Small size Surface mount Low profile Operating temp: -40°C to 125°CFunctional, supplementary or reinforced insulation ApplicationsIsolated interface power supply for CAN, RS-485, RS-422, RS-232, SPI, I2C, lower-power LANIndustrial automation Process control ...
PCB Mount 230Vac Primary VC/VCM Series Single and ...
Description:
PCB Mount 230Vac Primary VC/VCM Series Single and twin secondary windings for series or parallel connection Vacuum resin moulded to UL94-V0 rating Low inter-winding capacitance Low radiated noise100% electrical and flash tested Extra fixing points for secure board mounting (25 ...