Phoenix Contact Solid State Relay

Technical data sheets
Legislation and Compliance
Non Compliant
COO (Country of Origin): DE
Product Details

ELR Series load and interface relay

Electronic interface relays replace an entire reversing contactor circuit - including control input and load wiring lock mechanism. Contactless switching in the voltage zero point does not generate additional high-frequency interfering pulses. Input and load end suppressors permit permanently reliable operation, even with inductive loads.

ELR 3 / 9-400

Electronic load relay with 62 mm overall width
Input voltage 24V dc
Operating indicator
Protective circuit in input and output

ELR W3 / 9-400

Electronic interface relay with 62 mm overall width
Input voltage 24 Vdc
Load end 110–440 VAC maximum 9 A (see derating curve)

//media.rs-online.com/t_line/LD308149-01.gif

Zero Voltage Relays

Note

Temperature can affect current rating; please consult the data sheet for potential derating.

Specifications
Attribute Value
Minimum Load Current 150 mA
Series ELR W3/9-400
Control Voltage Range 24 V dc
Load Voltage Range 110 440V ac
1 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 756.66
(exc. GST)
$ 832.33
(inc. GST)
units
Per unit
1 - 5
$756.66
6 - 10
$729.24
11 +
$723.55
Related Products
The PDV13 series from Infineon is a single ...
Description:
The PDV13 series from Infineon is a single pole, normally open, solid-state replacement for electromechanical relays used for general purpose switching of analogue signals It utilises Infineon HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic ...
DIN rail mounting and only 62mm wide Input ...
Description:
DIN rail mounting and only 62mm wide Input voltages of 24Vdc up to 230V ac Switching currents up to 2APlug-in jumpers to link common potentials Status LEDMarking facility20 Pole jumper comb available with continuous current up to 36A.
Solid state power relay with charge, network and ...
Description:
Solid state power relay with charge, network and relay output diagnosticsTMS2 technology thyristor output ensures longevity.Input 7 → 30 Vdc with green LED control indicator.N/C static state contact Very low synchronism level.Spring-technology pull-out input connectors.Solid state relays must be mounted ...
62mm DIN-rail mount (35 mm) SSR assembly Ratings ...
Description:
62mm DIN-rail mount (35 mm) SSR assembly Ratings 24Vdc at 3.5A, 48Vdc at 100mA and 240Vac at 2A5 and 24 Vdc and 120V and 240 Vac control voltageUL and cUL recognised at 40°C, 100K-cycle endurance test Yellow LED input status ...