Asco Solenoid Valve SCG256A404VMS 230/50, 2 port , NC, 230 V ac, 1/4in

  • RS Stock No. 488-582
  • Mfr. Part No. SCG256B404VMS 230/50
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Two-way, Direct Operated, Zero Pressure, N/C Valves

Two-way, direct acting solenoid valves, normally closed with threaded port connection.

Brass body
Pressure not required for operation
Compact & lightweight
DIN plug connection
Ranging from -10°C to +100°C
Can be mounted in any position

Note

Pressure ranges are for water and may differ for other media.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Operation Direct
Connection 1/4 in G Female
Connection Size 1/4in
Default Valve Position NC
Suitable Applications Air, Inert Gas, Oil, Water
Type 2/2
Orifice Diameter 2.4mm
Body Material Brass
Maximum Working Pressure 12 bar
Operating Temperature Range -10 → +60 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +60°C
Series 256
Flow Factor Kv 0.16m³/h
Connection Gender Female
Maximum Closing Time 10ms
Thread Standard or Connection Type G
Maximum Opening Time 10ms
5 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 86.01
(exc. GST)
$ 94.61
(inc. GST)
units
Per unit
1 - 5
$86.01
6 - 11
$84.31
12 +
$83.27
Related Products
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° incrementsDuty cycle intermittent operation 40% 30 min8W nominal coil powerPower consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A 8W d.c.Zero ...
The direct-acting 2/2-way, normally closed type 6013Ex solenoid ...
Description:
The direct-acting 2/2-way, normally closed type 6013Ex solenoid valve is suitable for use with neutral and aggressive gases and fluids, for example: compressed air, town and natural gas, water, and hydraulic oil, in filling, dosing, and batching applications. The coil ...
Control valve for valves actuated by external fluidsSuitable ...
Description:
Control valve for valves actuated by external fluidsSuitable for Series 84720 (RS stock no. 529-5130) and 84740 (RS stock no. 529-5168)3 / 2-wayFor neutral gaseous and liquid fluidsComplete with connection nuts and sealVentilation, noise insulatedLow energy consumptionCompact designMagnet can be ...
Compact solenoid valves suitable for most gas and ...
Description:
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves ...