The XBee ZNet 2.5 (formerly Series 2) OEM RF module is ZigBee compliant and operates in the 2.4GHz ISM Band. It has been designed for use in mesh networks of wireless sensors.
Carrier frequency: 2.4GHz ISM band with 16 channels RF Power Output: +1dBm, +3dBm (Boost mode) Receiver Sensitivity: -96dBm @ 1% PER (Boost mode) Interference control: Direct Sequence Spread Spectrum (DSSS) OTA Date Rate: up to 250kbps Host communication: serial UART with RTS/CTS flow control Supported network topologies: Point-to-Point, Point-to-Multipoint & Peer-to-Peer and Mesh Antenna: Integral Whip (RS 436-480), U.FL (RS 436-490), SMA (RS 436-395), PCB (RS 771-6345) 4 channel 10-bit ADC 10 x GPIO pins Power supply: +2.1 to +3.6Vdc Operating temperature range: -40 to +85°C Dimensions: 24.4 x 27.6 x 7mm DIL format Applications: Wireless sensor networks, local communication for the Internet of Things (IoT)
Note
ZB and ZNet 2.5 firmware are similar in nature, but not over-the-air compatible. Devices running ZNet 2.5 firmware cannot communicate with devices running ZB firmware.
