Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 827-7182
- Mfr. Part No.:
- ZBRA1
- Brand:
- Schneider Electric
Technical data sheets
Legislation and Compliance
Product Details
RoHS Status: Exempt
- COO (Country of Origin):
- ID
Schneider Electric Relay Antenna - ZBRA1
Forming part of the Harmony XB5R range of products is this Schneider Electric relay antenna, brought to you with a transparent cover that is comprised of a polycarbonate material. This relay antenna does everything that a normal antenna would do, except it acts as a relay too.
This specific component is wireless and batteryless within a certain range, the antenna is predominantly used for transceiver control station applications.
Schneider Electrics relay antenna features an IP protection rating of IP65, this means that the antenna is protected against dust and other particulates. This kind of IP rating also means that the antenna is protected from low-pressure jets (6.3 mm) of water from any angle.
This specific component is wireless and batteryless within a certain range, the antenna is predominantly used for transceiver control station applications.
Schneider Electrics relay antenna features an IP protection rating of IP65, this means that the antenna is protected against dust and other particulates. This kind of IP rating also means that the antenna is protected from low-pressure jets (6.3 mm) of water from any angle.
Features & Benefits
• The base colour of the enclosure is black RAL 9011
• Predominantly used for XB5R and XB4R Ø 22 mm control units
• Features a rated supply voltage of 24 - 240 V AC/DC 50/60 Hz - 10 - 10 %
• Power consumption - <= 4 W AC/DC
• The connection terminal is pre-wired
• Signalling on the antenna is achieved via LED, 1 green for power ON and 1 green for emission signal
• Predominantly used for XB5R and XB4R Ø 22 mm control units
• Features a rated supply voltage of 24 - 240 V AC/DC 50/60 Hz - 10 - 10 %
• Power consumption - <= 4 W AC/DC
• The connection terminal is pre-wired
• Signalling on the antenna is achieved via LED, 1 green for power ON and 1 green for emission signal