Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	onsemi
	Maximum Switching Frequency	100 kHz
	Control Method	Current
	Mounting Type	Through Hole
	Package Type	PDIP
	Pin Count	7
	Topology	Flyback
	Maximum Duty Cycle	72%
	Dimensions	10.16 x 7.11 x 4.95mm
	Length	10.16mm
	PWM Controller Type	Current Mode
	Width	7.11mm
	Height	4.95mm
	Maximum Operating Supply Voltage	10 V
	Minimum Operating Supply Voltage	-3 V
	Maximum Operating Temperature	+150 °C

	Select all
	Brand onsemi
	Maximum Switching Frequency 100 kHz
	Control Method Current
	Mounting Type Through Hole
	Package Type PDIP
	Pin Count 7
	Topology Flyback
	Maximum Duty Cycle 72%
	Dimensions 10.16 x 7.11 x 4.95mm
	Length 10.16mm
	PWM Controller Type Current Mode
	Width 7.11mm
	Height 4.95mm
	Maximum Operating Supply Voltage 10 V
	Minimum Operating Supply Voltage -3 V
	Maximum Operating Temperature +150 °C

Datasheet NCP1013AP100G

Built-in 700V MOSFET with Typical RdsON of 11 or 22 Ohms
Large Creepage Distance between High-Voltage Pins
Current- Mode Fixed Frequency Operation: 65kHz - 100kHz - 130kHz
Skip-Cycle Operation at Low Peak Currents Only: No Acoustic Noise!
Dynamic Self-Supply, No Need of an Auxiliary Winding
Internal 1ms Soft-Start
Auto-Recovery Internal Output Short-Circuit Protection
Latched Overvoltage Protection with Auxiliary Winding Operation
Frequency Jittering for better EMI Signature
Below 100 mW Standby Power if Auxiliary Winding is Used
Internal Temperature Shutdown
Direct Optocoupler Connection
SPICE Models Available for Transient AC analysisEnd Products
Low Power AC/DC Adapter for Chargers
Applications
Auxiliary Power Supplies

onsemi NCP1013AP100G, PWM Controller, 10 V, 100 kHz 7-Pin, PDIP

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.