XinaBox xCHIP Raspberry Pi Zero Bridge CPU Module BR03

  • RS Stock No. 174-3695
  • Mfr. Part No. BR03
  • Manufacturer XinaBox
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

xChip Boards

xChips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on coding.

xChips are compatible with the platform you want to use and bridges are available for the most popular pltatforms; Raspberry Pi, Minnowboard, Beaglebone, Micro:bit, Pixhawk and 96 boards. Rather than bridging to Ardunio, we offer compatible cores for Arduino Uno, the CC01, and for Arduino Zero, the CC03.

xChips utilise I2C, and due to this bus architecture, unlimited expansion of circuits is possible. Limitations of I2C addresses have been negated by development multiplexers.

Because of its simple connection method, it is easy to build quickly - for prototyping and small product runs

xChips connect to each other using an xBus connector, available from RS 174-4977.

Some xChips need an xPDI connector (RS 174-4974) to connect to programming interfaces, such as the IP02 or IP03.

BR03 – Raspberry Pi Zero Bridge

This xChip is designed to interface with the Raspberry Pi Zero module. This provides a bridge into the xChip ecosystem, adding support for many additional sensors, etc.

Product Features

5 x xBus connections to interface with xChips

Supported Raspberry Pi Models

Raspberry Pi Zero (All variants)

Xinabox Modular Prototyping Boards

Attribute Value
Classification Module
Kit Name XCHIP Raspberry Pi Zero Bridge
Technology CPU
1 : Next working day (AU stock)
179 : 5 working days (Global stock)
Price (ex. GST) Each
Was $16.83
$ 13.46
(exc. GST)
$ 14.81
(inc. GST)
Per unit
1 - 1
2 - 4
5 - 9
10 - 24
25 +
Related Products
On-chip debugging emulator for Renesas Electronics microcontrollers (M16C, ...
On-chip debugging emulator for Renesas Electronics microcontrollers (M16C, H8, 740 family),Follow-on model from E8 Emulator Real-time emulation possible with CPU operating at maximum frequency Adequate break and trace functions installed for Tiny microcomputer system development Support memory expansion mode ...
The Pmod CON3 provides a standard 3-pin connector ...
The Pmod CON3 provides a standard 3-pin connector for up to four hobby servo motors • 4 x standard 3-pin hobby servomotor connectors• System must supply 50Hz PWM control signals• Screw connector option for external servo power supply• Jumper link ...
The Pmod MIC3 (Revision A) consists of a ...
The Pmod MIC3 (Revision A) consists of a Knowles Acoustics SPA2410LR5H-B MEMS microphone and an ADCS7476 12-bit ADC • MEMS Microphone module with digital interface• Reports to host whenever any external noise detected• ADC sampling rate: 1MSPS with 12-bit resolution• ...
chiliSOM is a System-On-Module by Grinn The SOM ...
chiliSOM is a System-On-Module by Grinn The SOM is an ultra-small, low-power, state-of-art module based on ARM Cortex-A8 processor. Easy to embed to a device. Also suitable for applications requiring high degree of density and high computational power. The module ...